Jaguar XJ (X350). Service manual — part 486
![](/vehicle/yohir/vahe/souieto/ndayous.png)
Cap the exposed ports.
Disconnect the coolant hoses.
57 . Remove the EGR valve and the exhaust manifold to EGR valve tube.
•
Remove the retaining bolts.
•
Remove and discard the exhaust manifold to EGR valve tube gasket.
•
Remove and discard the EGR valve to air intake elbow gasket.
58 . Disconnect the air intake elbow pipes.
56 . NOTE:
![](/vehicle/yohir/vahe/souieto/cunoul.png)
59 . NOTE:
Make sure correct location of the ground strap is noted.
Remove the air intake elbow retaining bracket lower retaining bolts.
60 . Detach the air intake elbow.
•
Remove and discard the gasket.
•
Remove and discard the retaining bolt seals.
61 . Remove the air intake elbow.
•
Disconnect the manifold absolute pressure (MAP) sensor.
www.
![](/vehicle/yohir/vahe/souieto/horoik.png)
62 . Remove the supercharger.
63 .
CAUTION: Make sure no foreign matter enters the cylinder head ports.
NOTE:
Right-hand shown, left-hand similar.
Remove the charge air coolers.
•
Remove and discard the charge air cooler gasket.
![](/vehicle/yohir/vahe/souieto/adir.png)
64 . Disconnect the knock sensor electrical connectors.
65 . NOTE:
Left-hand shown, right-hand similar.
Remove the ignition coil cover.
66 . Remove the engine cover retaining bracket.
67 . Remove the engine cover retaining bracket.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст