Jaguar XJ (X350). Service manual — part 1225
Tighten to 9 Nm.
16 . Carry out the air conditioning (A/C) system evacuation and charging procedure. <<412-00>>
17 . Carry out the A/C system flourescent dye leak detection procedure. <<412-00>>
18 . Refit the radiator grille opening panel. <<501-02>>
Condenser Core - 2.7L V6 - TdV6
(82.15.07)
Removal
1
.
Carry out the air conditioning (A/C) system recovery procedure.
For additional information, refer to Air Conditioning (A/C) System Recovery, Evacuation and
Charging (82.30.30)
2 . NOTE:
Petrol engine variant shown, diesel engine variant similar.
Remove the radiator grille opening panel.
3 . NOTE:
Cap the exposed ports.
Disconnect the condenser core supply line.
Remove and discard the O-ring seal.
www.
4 . Remove the radiator splash shield.
For additional information, refer to Radiator Splash Shield (76.22.90)
5 . Remove the radiator lower cowl.
6 . NOTE:
Cap the exposed ports.
Disconnect the condenser core return line.
Remove and discard the O-ring seal.
7 . Detach the condenser core.
Remove the retaining bolts.
8 . Remove the condenser core.
Installation
1 . To install, reverse the removal procedure.
Tighten to 7 Nm.
2 . NOTE:
Install a new O-ring seal.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст