Jaguar XJ (X350). Service manual — part 523
![](/vehicle/yohir/vahe/souieto/sotr.png)
14 . Disconnect the intake air temperature (IAT) sensor electrical connector.
15 . NOTE:
Remove and discard the O-ring seal.
Remove the intake air shutoff throttle elbow and charge air cooler outlet tube assembly.
16 . Disconnect the exhaust gas recirculation (EGR) coolant hose.
17 . Disconnect the radiator top hose from the cylinder head coolant outlet assembly.
![](/vehicle/yohir/vahe/souieto/yed.png)
18 . Using a suitable tie strap, secure the radiator top hose.
19 . Disconnect the charge air cooler intake hose.
20 . Disconnect the power assisted steering (PAS) pump supply hose.
www.
![](/vehicle/yohir/vahe/souieto/trfith.png)
21 . Detach the front air spring supply tube.
22 . Detach the PAS fluid reservoir.
23
.
CAUTION: If power steering fluid comes into contact with the paintwork, the
affected area must be immediately washed down with cold water.
NOTE:
Cap the power steering lines to prevent loss of fluid and dirt ingress.
NOTE:
Remove and discard the O-ring seal.
Disconnect the PAS pump to steering gear high-pressure line.
![](/vehicle/yohir/vahe/souieto/xlore.png)
24 . NOTE:
PAS pump shown removed for clarity.
NOTE:
Remove and discard the O-ring seal.
NOTE:
Cap the exposed ports.
Disconnect the air conditioning (A/C) high-pressure line.
25 . Disconnect the automatic transmission cooler coolant hose.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст