Jaguar XJ (X350). Service manual — part 66
2 . Install the upper arm front retaining nut.
3 . Install the upper arm rear retaining nut.
4 . Install the air spring assembly.
5
.
NOTE:
The final tightening of the Upper arm retaining nut must be carried out with the vehicle
on its wheels.
Tighten to 47 Nm.
6
.
NOTE:
The final tightening of the Upper arm retaining nut must be carried out with the vehicle
on its wheels.
Tighten to 47 Nm.
7 . Attach the hydraulic control unit mounting bracket.
8 . Install the hydraulic control unit mounting bracket retaining bolt.
9 . Install the hydraulic control unit mounting bracket upper retaining bolt.
www.
10 . Attach the hydraulic control unit.
1) Tighten to 9 Nm.
11 . Attach the engine compartment battery junction box.
12 . Install the cowl vent screen access panel.
Front Wheel Bearing and Wheel Hub
(60.25.03)
Removal
1
.
Remove the brake disc.
For additional information, refer to
Brake Disc - Vehicles With: Standard Brakes, VIN Range:
G00442->G45703 (70.10.10)
For additional information, refer to
Brake Disc - Vehicles With: Standard Brakes, VIN Range:
G45704->G99999 (70.10.10)
For additional information, refer to
Brake Disc - Vehicles With: High Performance Brakes, VIN
Range: G00442->G45703 (70.10.10)
For additional information, refer to
Brake Disc - Vehicles With: High Performance Brakes, VIN
Range: G45704->G99999 (70.10.10)
2 . Detach the front wheel speed sensor harness.
3 . Disconnect the front wheel speed sensor electrical connector.
4 . Remove the wheel bearing and wheel hub retaining bolts.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст