Jaguar XJ (X350). Service manual — part 1213
![](/vehicle/yohir/vahe/souieto/wail.png)
8 . Install the steering gear shaft pinch bolt.
Tighten to 35 Nm.
All vehicles
9 . Install the air deflector.
For additional information, refer to Air Deflector (76.11.41)
10 . Install the left-hand front wheel and tire assembly.
For additional information, refer to Wheel and Tire (74.20.05)
Tighten to 125 Nm.
11
.
Attach the accessory drive belt.
1) Rotate the accessory drive belt tensioner counter-clockwise.
Use a 3/8 inch square drive bar to rotate the accessory drive belt
tensioner.
![](/vehicle/yohir/vahe/souieto/rong.png)
2) Attach the accessory drive belt.
12 . Install the air cleaner.
For additional information, refer to Air Cleaner (19.10.05)
13 . Connect the battery ground cable.
For additional information, refer to Battery Connect (86.15.15)
14
.
Carry out the A/C system evacuation and charging procedure.
For additional information, refer to Air Conditioning (A/C) System Recovery, Evacuation and
Charging (82.30.30)
www.
![](/vehicle/yohir/vahe/souieto/sas.png)
Air Conditioning (A/C) Compressor - 3.0L
NA V6 - AJ27, VIN Range: G45704-
>G99999 (82.10.20)
Removal
All vehicles
1
.
Carry out the air conditioning (A/C) system recovery procedure.
For additional information, refer to Air Conditioning (A/C) System Recovery, Evacuation and
Charging (82.30.30)
2 . Disconnect the battery ground cable.
For additional information, refer to Battery Disconnect and Connect
3 . Remove the air cleaner.
For additional information, refer to Air Cleaner (19.10.05)
4
.
Detach the accessory drive belt.
1) Rotate the accessory drive belt tensioner counter-clockwise.
Use a 3/8 inch square drive bar to rotate the accessory drive belt
tensioner.
2) Detach the accessory drive belt.
![](/vehicle/yohir/vahe/souieto/rote.png)
5 . Remove the left-hand front wheel and tire.
For additional information, refer to Wheel and Tire (74.20.05)
6 . Remove the air deflector.
For additional information, refer to Air Deflector (76.11.41)
Left-hand drive vehicles
7 . Remove the steering gear shaft pinch bolt.
8 .
CAUTION: The steering gear must be supported at all times.
Detach the steering gear.
9 .
CAUTION: The steering gear must be supported at all times.
Using suitable tie straps, secure the steering gear.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст