Jaguar XJ (X350). Service manual — part 526
6 . Reposition the starter motor positive cable insulation cover.
7 . Connect the engine coolant inlet hose.
8 . Install the power steering line retaining bolt.
Tighten to 10 Nm.
9 . NOTE:
Remove the blanking caps.
NOTE:
Install a new O-ring seal.
Connect the air conditioning (A/C) high-pressure line.
Tighten to 10 Nm.
10 . Attach the left-hand fender splash shield.
www.
11 . Lower the vehicle.
12 . Connect the engine control module (ECM) electrical connectors.
13 . Connect the engine harness electrical connector.
Tighten to 10 Nm.
14 . Install the engine compartment left-hand panel.
15 . Install the cabin air filter housing.
16 . Attach the cabin air filter.
1) Install the cabin air filter.
2) Attach the cabin air filter.
17 . NOTE:
Install a new O-ring seal.
Install the windshield washer reservoir fiiler neck.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст