Jaguar XJ (X350). Service manual — part 816
Supercharger - VIN Range: G45704-
>G99999 (18.50.15)
Installation
1 . Install the supercharger.
Tighten to 21 Nm.
2 . Connect the MAP sensor.
3 . Install the air intake elbow.
Install a new gasket.
Install new retaining bolt seals.
Tighten to 21 Nm.
4 . Install the air intake elbow retaining bracket lower retaining bolts.
Tighten to 18 Nm.
5 . Connect the air intake elbow pipes.
6 . Install the EGR valve and the exhaust manifold to EGR valve tube.
Install a new exhaust manifold to EGR valve tube gasket.
Install a new EGR valve to air intake elbow gasket.
Tighten to 10 Nm.
www.
7 . Install the exhaust manifold to EGR valve tube retaining nuts.
Tighten to 21 Nm.
8 . NOTE:
Remove the sealing caps from the coolant ports.
Connect the coolant hoses.
9 . Connect the EGR valve electrical connector.
10 . Connect the IAT sensor electrical connector.
11 . Connect the charge air cooler coolant hoses.
12 . Install the coolant assembly.
Install new O-ring seals.
Connect the coolant hose.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст