Jaguar XJ (X350). Service manual — part 376
51 . Detach the right-hand ignition coil wiring harness.
52 . Disconnect the right-hand ignition coil electrical connectors.
53 . Detach the right-hand ignition coil wiring harness.
54
.
Detach the engine wiring harness.
Detach the ground cable.
Disconnect the variable camshaft timing (VCT) solenoid electrical
connector.
Detach the engine wiring harness.
55 . NOTE:
Left-hand shown, right-hand similar.
Remove the ignition coils.
Remove the retaining bolts.
Vehicles without supercharger
56 . Disconnect the positive crankcase ventilation (PCV) pipe.
www.
All vehicles
57 . Remove the right-hand valve cover.
Remove and discard the valve cover gaskets.
58 . Remove the left-hand valve cover.
Remove and discard the valve cover gaskets.
59 . Using the special tool, remove the water pump pulley.
Using the special tool, retain the water pump pulley.
60 . NOTE:
Place a suitable container underneath the oil filter housing to prevent oil spillage.
Remove the oil filter.
61 . Disconnect the oil pressure switch and oil temperature sensor electrical connectors.
62 . Remove the oil filter housing.
Remove and discard the O-ring seal.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст