Jaguar XJ (X350). Service manual — part 1534
Vehicles with 3.0L engine
6 . NOTE:
Right-hand shown, left-hand similar.
Remove the engine compartment support.
All except vehicles with diesel engine
7 . Remove the outer bulkhead panel insulation.
8 . Remove the outer bulkhead panel.
Remove the securing bolts.
Remove the retaining clip.
9 . Detach the inner bulkhead panel insulation.
10 . Reposition the inner bulkhead panel.
All vehicles
11 . Disconnect the wiper motor electrical connector.
www.
12
.
Remove the brake master cylinder.
For additional information, refer to Brake Master Cylinder - 4.2L NA V8 - AJV8/4.2L SC V8 -
AJV8/3.0L NA V6 - AJ27/3.5L NA V8 - AJV8 (70.30.08)
For additional information, refer to Brake Master Cylinder - 2.7L V6 - TdV6 (70.30.08)
13 . Remove the brake booster.
For additional information, refer to Brake Booster (70.50.17)
14 . Detach the wiper mounting arm and pivot shaft assembly.
15 . Remove the windshield wiper motor.
Installation
All vehicles
1 . To install, reverse the removal procedure.
Tighten to 15 Nm.
2 . Tighten to 17 Nm.
3 . Tighten to 12 Nm.
Tighten in the sequence shown.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст