Jaguar XJ (X350). Service manual — part 188
Make sure that the brake pad with the anti-rattle spring is installed to the inboard side
of the brake disc.
NOTE:
Left-hand shown, right-hand similar.
Install the brake pads.
2
.
CAUTION: As the piston is pushed back into the caliper housing, the brake fluid level
in the reservoir will rise. Do not allow the reservoir to overflow.
CAUTION: If brake fluid comes into contact with the paintwork, the affected area
must be immediately washed down with cold water.
NOTE:
Only the extraction bolt from special tool 303-588 is used.
NOTE:
Only the forcing plate from special tool 206-080 is used.
NOTE:
Right-hand shown, left-hand similar.
NOTE:
Using the special tools, fully retract the brake caliper piston.
3 . NOTE:
Left-hand shown, right-hand similar.
Install the brake caliper retaining bolts.
1) Install the brake caliper.
2) Tighten to 28 Nm.
4 . NOTE:
Left-hand shown, right-hand similar.
Install the brake caliper retaining bolt dust covers.
www.
5 . NOTE:
Left-hand shown, right-hand similar.
Attach the brake hose.
Install new sealing washers.
Tighten to 35 Nm.
6 . NOTE:
Left-hand shown, right-hand similar.
Install the anti-rattle spring.
Vehicles with high performance brakes
7 . NOTE:
Left-hand shown, right-hand similar.
Install the logo badge.
Tighten to 5 Nm.
All vehicles
8 . Attach the parking brake cable.
9 . Remove the brake pedal hold-down tool.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст