Jaguar XJ (X350). Service manual — part 886
![](/vehicle/yohir/vahe/souieto/sisaveca.png)
Knock Sensor (KS) LH (18.30.92)
Removal
1 . Remove the fuel supply manifold. <<303-04A>>
2 . Disconnect the knock sensor electrical connector.
3 . Remove the knock sensor.
Installation
1 . To install, reverse the removal procedure.
Tighten to 25 Nm.
![](/vehicle/yohir/vahe/souieto/kitcellise.png)
Knock Sensor (KS) RH (18.30.93)
Removal
1 . Remove the air deflector. <<501-02>>
2 . Disconnect the knock sensor electrical connector.
3 . Remove the knock sensor.
Installation
1 . To install, reverse the removal procedure.
Tighten to 25 Nm.
www.
![](/vehicle/yohir/vahe/souieto/bey.png)
![](/vehicle/yohir/vahe/souieto/cal.png)
Manifold Absolute Pressure (MAP) Sensor
(18.30.86)
Removal
1 . Disconnect the manifold absolute pressure (MAP) sensor electrical connector.
2 . Remove the MAP sensor.
Installation
1 . To install, reverse the removal procedure.
Tighten to 10 Nm.
www.
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст