Jaguar XJ (X350). Service manual — part 1065
![](/vehicle/yohir/vahe/souieto/xatot.png)
Loss of automatic
transmission fluid
Leak at oil cooler.
Check the torque of the tubes.
Check the tubes, connections and
seals.
INSTALL new oil cooler.
![](/vehicle/yohir/vahe/souieto/elit.png)
Removal and installation
Transmission Fluid Cooler - 2.7L V6 - TdV6
(44.24.10)
Special Service Tools
Remover/Installer, Cooling Hose Clamp
303-397 (24-003)
Removal
1 . Remove the air deflector.
For additional information, refer to Air Deflector (76.11.41)
2 . Reposition the left-hand splash shield.
3 . NOTE:
Discard the O-ring seals.
Detach the transmission fluid cooler tubes.
Allow the transmission fluid to drain into a suitable container.
www.
![](/vehicle/yohir/vahe/souieto/didour.png)
4 . NOTE:
Install a suitable pipe clamp to minimize coolant loss.
Using the special tool, detach the transmission fluid cooler coolant hose.
5 . NOTE:
Install a suitable pipe clamp to minimize coolant loss.
Using the special tool, detach the transmission fluid cooler coolant hose.
6 . Detach the transmission fluid cooler.
![](/vehicle/yohir/vahe/souieto/zyorsa.png)
7 . Remove the transmission fluid cooler.
Installation
1 . Install the transmission fluid cooler.
2 . Attach the transmission fluid cooler.
Tighten to 5 Nm.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст