Jaguar XJ (X350). Service manual — part 597
10 . Remove the water pump retaining bracket.
11 . NOTE:
Left-hand shown, right-hand similar.
Detach the power assisted steering oil cooler.
12
.
NOTE:
Left-hand shown, right-hand similar.
Remove the cooling module retaining bolt.
Secure the supercharger cooling radiator, condenser core and engine oil
cooler using suitable retaining straps.
Vehicles without supercharger
13 . NOTE:
Left-hand shown, right-hand similar.
Detach the power steering oil cooler.
14 . NOTE:
Left-hand shown, right-hand similar.
Remove the condenser core retaining stud.
Secure the condenser core and PAS cooler using suitable retaining straps.
www.
All vehicles
15 . Lower the vehicle.
16 .
CAUTION: Make sure that the radiator is not damaged when removed.
Remove the radiator.
Installation
All vehicles
1 .
CAUTION: Make sure that the radiator is not damaged when installed.
To install, reverse the removal procedure.
Vehicles without supercharger
2 . NOTE:
Left-hand shown, right-hand similar.
Tighten to 7 Nm.
3 . NOTE:
Left-hand shown, right-hand similar.
Tighten to 7 Nm.
Vehicles with supercharger
4 . NOTE:
Left-hand shown, right-hand similar.
Tighten to 7 Nm.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст