Jaguar XJ (X350). Service manual — part 1148
9 . Remove the fuel tank filler pipe to fuel tank hose.
10 . Disconnect the rear axle electrical connectors.
11 . Detach the rear axle electrical connectors.
12 . Disconnect the evaporative emission pipe.
13 . NOTE:
Left-hand shown, right-hand similar.
Remove and discard the 2 rear subframe front retaining bolts
14 . NOTE:
Left-hand shown, right-hand similar.
Remove the noise, vibration and harshness brace.
Remove the 6 bolts.
www.
15
.
CAUTION: When supporting the fuel tank, use a suitable packing material to
prevent damage to the underside of the fuel tank.
Remove the fuel tank.
Detach the fuel tank support straps.
Installation
1 . To install, reverse the removal procedure.
Tighten to 35 Nm.
2 . NOTE:
Left-hand shown, right-hand similar
Loosely install the 2 rear subframe front retaining bolts.
Install new retaining bolts.
3 . NOTE:
Left-hand shown, right-hand similar
Loosely install the 6 noise, vibration and harshness brace retaining bolts.
4 . NOTE:
Left-hand shown, right-hand similar
Tighten the 2 bolts to 125 Nm.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст