Jaguar XJ (X350). Service manual — part 737
![](/vehicle/yohir/vahe/souieto/dand.png)
![](/vehicle/yohir/vahe/souieto/qunelo.png)
Supercharger Belt Tensioner (18.50.24)
Removal
1 . Disconnect the battery ground cable.
For additional information, refer to
2 . Remove the air cleaner outlet pipe.
For additional information, refer to Air Cleaner Outlet Pipe (19.10.31)
3 . Detach the supercharger belt.
Use a 1/2 inch square drive bar to rotate the supercharger belt tensioner.
Detach the supercharger belt.
4 . Remove the air deflector.
For additional information, refer to
5 . NOTE:
Remove and discard the oil cooler pipe O-ring seal.
Detach the oil cooler pipe from the oil filter adaptor.
1) Remove the the oil cooler pipe retaining bolt.
www.
![](/vehicle/yohir/vahe/souieto/eib.png)
2) Detach the oil cooler pipe from the oil filter adaptor.
6 . Remove the supercharger belt tensioner.
Installation
1 . NOTE:
Install a new O-ring seal to oil cooler pipe.
To install, reverse the removal procedure.
Tighten to 40 Nm.
![](/vehicle/yohir/vahe/souieto/avee.png)
303-06 : Starting System
Specifications
Specifications
Torque Specifications
Description
Nm
lb-
ft
lb-
in
Starter motor retaining bolts - Vehicles fitted with 3.0L engines
25 18 -
Starter motor retaining bolts - Vehicles fitted with 3.5L or 4.2L engines
45 33 -
Starter motor retaining bolts - Vehicles fitted with 2.7L diesel engines
48 35 -
Battery positive terminal integral connector retaining nut - Vehicles fitted with
3.0L engines
11 9
-
Battery positive terminal integral connector retaining nut - Vehicles fitted with
3.5L or 4.2L engines
9
-
80
Battery positive terminal integral connector retaining nut - Vehicles fitted with
2.7L diesel engines
11 9
-
Solenoid terminal integral connector retaining nut
7
-
62
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст