Jaguar XJ (X350). Service manual — part 805
![](/vehicle/yohir/vahe/souieto/ering.png)
15 . Detach the vent hose.
16 . Disconnect the coolant inlet hose.
17 . Detach the coolant inlet hose from the timing cover.
![](/vehicle/yohir/vahe/souieto/becdod.png)
18 . Remove the EGR valve and cooler assembly securing bolts.
19 . Reposition the EGR valve and cooler assembly.
20 . Remove the EGR valve and cooler assembly.
21 . Remove the EGR valve.
www.
![](/vehicle/yohir/vahe/souieto/iath.png)
Installation
1 . To install, reverse the removal procedure.
Tighten to 10 Nm.
2 . Tighten to 10 Nm.
3 . Tighten to 10 Nm.
4 . Tighten to 10 Nm.
![](/vehicle/yohir/vahe/souieto/isl.png)
5 . Tighten to 5 Nm.
6
.
CAUTION: Make sure the high and low pressure hoses are fully installed and the
retaining clips are positioned in their original position.
Tighten to 25 Nm.
7 . Fill and bleed the cooling system.
For additional information, refer to Cooling System Draining, Filling and Bleeding
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст