Jaguar XJ (X350). Service manual — part 336
23 . NOTE:
Left-hand intake manifold tuning (IMT) valve shown, right-hand (IMT) valve similar.
Disconnect the IMT valves electrical connectors.
24 . Disconnect the fuel pressure regulator vacuum hose.
25 . Disconnect the brake booster vacuum hose.
26 . Remove the intake manifold.
Installation
1
.
NOTE:
Install new intake manifold gaskets.
NOTE:
The intake manifold retaining bolts in position 1, 4 and 5 are longer than the retaining
bolts in position 2, 3 and 6.
NOTE:
Do not fully tighten the retaining bolts.
Install the intake manifold.
www.
2 . Connect the brake booster vacuum hose.
3 . Connect the fuel pressure regulator vacuum hose.
4 . NOTE:
Left-hand intake manifold tuning (IMT) valve shown, right-hand (IMT) valve similar.
Connect the IMT valves electrical connectors.
5 . Connect the fuel pressure sensor vacuum hose
6 . Connect the manifold absolute pressure (MAP) sensor electrical connector.
7
.
NOTE:
The evaporative emission canister purge valve transfer pipe is attached to the induction
manifold by a quick release coupling.
Connect the evaporative emission canister purge valve transfer pipe.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст