Jaguar XJ (X350). Service manual — part 293
![](/vehicle/yohir/vahe/souieto/winsl.png)
Install the steering wheel.
3
.
CAUTION: Check the alignment arrow is still in the vertical position with the wheels
straight ahead to make sure that the directional indicator cancellation is central.
Tighten to 65 Nm.
![](/vehicle/yohir/vahe/souieto/alarhonghow.png)
Steering Column
Disassembly
1 . Remove the Steering Column Lock Actuator.
2 . Detach the wiring harness .
3 . Detach the steering column electrical connector housing.
4 . Remove the steering column electrical connector housing.
•
Disconnect the electrical connectors.
5 . NOTE:
Remove and discard the tilt solenoid retaining bolts.
www.
![](/vehicle/yohir/vahe/souieto/yenonthadome.png)
Remove the tilt solenoid.
•
Detach the tilt solenoid wiring harness.
6 . NOTE:
Remove and discard the telescopic solenoid retaining bolts.
Remove the telescopic solenoid.
•
Remove and discard the retaining strap.
7 . Remove the tilt/telescopic motor retaining pin.
•
Remove and discard the retaining pin and washers.
8 . Remove and discard the telescopic housing retaining bolts.
![](/vehicle/yohir/vahe/souieto/venam.png)
9
.
CAUTION: Make sure the potentiometer sliders are fully disconnected.
Failure to follow this instruction may result in component damage.
Reposition the tilt/telescopic motor.
10 . NOTE:
The tilt/telescopic motor will only need to be rotated if the motor is inoperative.
Rotate the tilt/telescopic motor as shown.
•
Press the telescopic solenoid engagement pin.
11 . Remove the tilt/telescopic motor.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст