Jaguar XJ (X350). Service manual — part 957
Camshaft Position (CMP) Sensor LH
(18.31.12)
Removal
Vehicles with 3.5L or 4.2L engine without supercharger
1 . Remove the oil filler cap.
2 . Remove the engine cover.
Vehicles with supercharger
3 . Remove the engine cover.
All vehicles
4 . Remove the cowl vent screen. <<501-02>>
5
.
NOTE:
Vehicles with supercharger shown, vehicles with 3.5L or 4.2L engine without
supercharger similar.
NOTE:
Left-hand shown, right-hand similar.
Remove the engine compartment supports.
Vehicles with supercharger
6 . Loosen the throttle body intake pipe retaining clip.
7 . Detach the air filter outlet pipe
www.
8 . Remove the throttle body intake pipe.
1) Detach the throttle body intake pipe.
2) Remove the throttle body intake pipe.
All vehicles
9 . NOTE:
Right-hand drive vehicles shown, left-hand drive vehicles similar.
Remove the engine compartment outer panel insulation.
Right-hand drive vehicles
10 . Remove the engine compartment outer panel.
Left-hand drive vehicles
11 . Remove the engine compartment outer access panel.
All vehicles
12 . NOTE:
Right-hand drive vehicles shown, left-hand drive vehicles similar.
Remove the cabin air filter.
1) Detach the cabin air filter.
2) Remove the cabin air filter.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст