Jaguar XJ (X350). Service manual — part 382
24 . NOTE:
Tighten the retaining bolts in the sequence shown.
Install the upper oil pan.
Tighten to 21 Nm.
25 . NOTE:
Install a new O-ring seal.
Install the oil strainer.
Tighten to 12 Nm.
26 . Install the oil pan gasket to the oil pan body assembly.
27 . Install the lower oil pan.
Install, but do not fully tighten the retaining bolts.
www.
28 . Tighten the retaining bolts in the indicated sequence in two stages.
Stage 1: bolts 1 to 7, tighten to 5 Nm.
Stage 2: bolts 1 to 17, tighten to 12 Nm.
29 . Install the drive plate.
Install the drive plate.
Install the drive plate retaining bolts, and tighten in 2 stages.
Stage 1: Tighten to 15 Nm.
Stage 2: Tighten to 110 Nm.
30 . Position the crankshaft.
Install the special tool.
31 . Install the left-hand primary timing chain tensioner guide.
Tighten to 12 Nm.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст