Hyundai Ioniq Electric (2019 year). Manual — part 12

Convenient features of your vehicle
AUTOMATIC CLIMATE CONTROL SYSTEM
■ Type A
1. Temperature control knob
2. Fan speed control knob
3. AUTO (automatic control) button
4. OFF button
5. Front windshield defrost button
6. Rear window defrost button
7. Air conditioning button
■ Type B
8. Air intake control button
9. Mode selection button
10. Driver only button
11. HEAT button
12. EV button
13. Climate control information screen
OAEE046300N/OAEE046301N
3-112
Automatic Heating and Air
To turn the automatic operation off,
Conditioning
select any button of the following:
- Mode selection button
- Front windshield defroster button
(Press the button one more time
to deselect the front windshield
defroster function. The 'AUTO'
sign will illuminate on the infor-
3
mation screen once again.)
- Fan speed control knob
OAEE046305
The selected function will be con-
trolled manually while other functions
2. Turn the temperature control knob
operate automatically.
to the desired temperature. If the
OAEE046323L
For your convenience and to improve
temperature is set to the lowest
The Automatic Climate Control
setting
(Lo), the air conditioning
the effectiveness of the climate con-
System is controlled by setting the
system will operate continuously.
trol, use the AUTO button and set the
desired temperature.
temperature to 73°F (23°C).
1. Press the AUTO button.
To change the temperature unit from
°F to °C or °C to °F:
The modes, fan speeds, air intake
and air-conditioning will be controlled
Press and hold the AUTO and OFF
automatically by the temperature set-
buttons on the climate control unit for
ting you select.
3 seconds.
3-113
Convenient features of your vehicle
Manual Heating and Air
3. Set the temperature control to the
Conditioning
desired position.
4. Set the air intake control to the
The heating and cooling system can
be controlled manually by pushing
outside (fresh) air position.
buttons other than the AUTO button.
5. Set the fan speed control to the
In this case, the system works
desired speed.
sequentially according to the order of
6. If air conditioning is desired, turn
buttons selected.
the air conditioning system on.
When pressing any button except the
7. Press the AUTO button in order to
AUTO button while using automatic
convert to full automatic control of
operation, the functions not selected
OAEE046302N
the system.
will be controlled automatically.
NOTICE
1. Start the vehicle
(
indicator
ON).
Never place anything near the
sensor to ensure better control of
2. Set the mode to the desired posi-
the heating and cooling system.
tion.
To improve the effectiveness of
heating and cooling:
- Heating:
- Cooling:
3-114
Mode selection
3
OAEE046303
The mode selection button controls
the direction of the air flow through
the ventilation system.
OAEE046320
3-115
Convenient features of your vehicle
The air flow outlet direction is cycled
Floor & Defrost
as follows:
(A, C, E)
■ MODE DOWN (
)
Most of the air flow is directed to the
floor and the windshield with a small
amount directed to the side window
defrosters.
■ MODE UP (
)
Floor-Level (A, C, E)
OAEE046304
Defrost-Level (A)
Most of the air flow is directed to the
Most of the air flow is directed to the
Face-Level (B, D, F)
floor, with a small amount of the air
windshield with a small amount of air
being directed to the windshield and
directed to the side window defrosters.
side window defrosters.
Air flow is directed toward the upper
body and face. Additionally, each
outlet can be controlled to direct the
air discharged from the outlet.
Bi-Level (B, C, D, E, F)
Air flow is directed towards the face
and the floor.
3-116
■ Front
Temperature control
Temperature conversion
If the battery has been discharged or
disconnected, the temperature mode
display will reset to Fahrenheit.
To change the temperature unit from
°F to °C or °C to °F:
- On the instrument cluster, go to
3
User Settings Mode
➝ Other
Features ➝ Temperature Unit.
OAEE046321
- Press the AUTO button for 3 sec-
■ Rear
onds while pressing the OFF button.
OAEE046305
Both the temperature unit on the
Turn the knob to the right to increase
cluster LCD display and climate con-
the fan temperature and airflow. Turn
trol information screen will change.
the knob to the left to decrease fan
temperature.
The temperature will increase or
decrease by 1°F/0.5°C.
OAE046309
Interior panel vents
The outlet vents can be opened or
closed (
) using the vent control
lever.
Also, you can adjust the direction of
air delivered from these vents using
the vent control lever as shown.
3-117
Convenient features of your vehicle
Air intake control
Outside (fresh) air position
Outside (fresh) air position
This button is used to select the out-
With the outside (fresh)
With the outside (fresh)
side (fresh) air position or recirculat-
air position selected, air
air position selected, air
ed air position.
enters the vehicle from
enters the vehicle from
outside and is heated or
outside and is heated or
■ Type A
cooled according to the
cooled according to the
function selected.
function selected.
■ Type B
i
Information
Prolonged use of the air conditioning
with the recirculated air position
selected will result in excessively dry
air in the passenger compartment.
OAEE046306
Recirculated air position
With the recirculated air
position selected, air
OAEE046314
from the passenger
Recirculated air position
compartment will be
drawn through the heat-
With the recirculated air
ing system and heated
position selected, air
or cooled according to
from the passenger
the function selected.
compartment will be
drawn through the heat-
ing system and heated
or cooled according to
the function selected.
3-118
Fan speed control
NOTICE
WARNING
Operating the fan when the
Continued use of the climate
POWER button is in the ON posi-
control system operation in
tion could cause the battery to
the recirculated air position
discharge. Operate the blower
can cause drowsiness or
when the vehicle is in the ready
sleepiness, that may cause
(
) mode.
3
loss of vehicle control result-
ing in an accident. Set the air
intake control to the outside
(fresh) air position as much as
possible while driving.
Continued use of the climate
OAEE046307
control system operation in
The fan speed can be set to the
the recirculated air position
desired speed by turning the fan
(without the air conditioning
speed control knob.
selected) may allow humidity
The higher the fan speed is, the
to increase inside the vehicle
more air is delivered.
which may fog the glass and
obscure visibility.
Pressing the OFF button turns off the
fan.
Do not sleep in a vehicle with
the air conditioning or heating
system on. It may cause seri-
i
Information
ous injury or death due to a
For better voice recognition, fan speed
drop in the oxygen level
may automatically slow down for a
and/or body temperature.
couple of minutes when you activate
voice recognition or hands free.
3-119
Convenient features of your vehicle
Driver only
Air conditioning
HEAT button
■ Type A
OAEE046310
■ Type B
OAE046314
OAEE046308
Push the A/C button to manually turn
If you press the DRIVER ONLY but-
DRIVER
the system on (indicator light will illu-
ton(
ONLY
) and the indicator light
minate) and off.
illuminates, cold air mostly blows in
the direction of the driver’s seat.
However, some of the cold air may
come out of other seating position
ducts to keep indoor air pleasant.
If you use the button with no passen-
OAEE046313
ger in the front passenger seat, ener-
gy consumption will be reduced.
Push the HEAT button to turn the
DRIVER ONLY button will be turned
heater on (indicator light will illumi-
off under the following conditions:
nate).
1) Defrost on
(the DRIVER ONLY
Push the button again to turn the
button indicator is not turned off)
heater off.
2) DRIVER ONLY button re-push
3-120
Air conditioner/Heater uses energy
EV mode (if equipped)
OFF mode
from the battery. If you use the heater
or air conditioner for too long, dis-
tance to empty can be reduced due
to increased power consumption.
Turn off the heater and air conditioner
if not necessary.
3
OAEE046311
OAEE046309
Push the EV button to enter the EV
Push the OFF button to turn the cli-
mode on the AVN screen.
mate control system off. You can still
The EV mode has a total of 7 menus
operate the mode and air intake but-
tons as long as the POWER button is
including Range, Nearby Stations,
Energy Information, Drive Mode,
in the ON position.
ECO Driving, Charging/Climate
Settings and EV Settings.
For details on EV mode, refer to
the Multimedia System manual
that is provided separately.
3-121
Convenient features of your vehicle
System Operation
Operation Tips
Air conditioning
Ventilation
To keep dust or unpleasant fumes
All HYUNDAI Air Conditioning
from entering the car through the
Systems are filled with environmen-
1. Select the Face Level
mode.
ventilation system, temporarily set
tally friendly R-134a refrigerant.
2. Set the air intake control to the
the air intake control to the recircu-
1. Start the vehicle.
outside (fresh) air position.
lated air position. Return the con-
2. Push the air conditioning button.
3. Set the temperature control to the
trol to the fresh air position when
desired position.
the irritation has passed. This will
3. Set the mode to the Face Level
help keep the driver alert and com-
mode.
4. Set the fan speed control to the
fortable.
4. Set the air intake control to the
desired speed.
To prevent the inside of the wind-
recirculated air position. However,
shield from fogging, set the air
prolonged operation of the recircu-
Heating
lated air position will excessively
intake control to the fresh air posi-
1. Select the Floor Level
mode.
tion and fan speed to the desired
dry the air. In this case, change the
position, turn on the air conditioning
air position.
2. Set the air intake control to the
outside (fresh) air position.
system, and adjust the temperature
5. Adjust the fan speed control and
control to desired temperature.
temperature control to maintain
3. Set the temperature control to the
maximum comfort.
desired position.
When maximum cooling is desired,
4. Set the fan speed control to the
set the temperature control to the
desired speed.
extreme left position then set the fan
5. If dehumidified heating is desired,
speed control to the highest speed.
turn the air conditioning system on.
If the windshield fogs up, select the
Floor & Defrost
mode or press
the Front Defrost
mode.
3-122
Air conditioning system operation
If you operate air conditioner
System Maintenance
tips
excessively, the difference between
Climate control air filter
the temperature of the outside air
If the vehicle has been parked in
and that of the windshield could
direct sunlight during hot weather,
cause the outer surface of the
Outside air
open the windows for a short time
windshield to fog up, causing loss
to let the hot air inside the vehicle
of visibility. In this case, set the
Recirculated
escape.
air
mode selection knob or button to
After sufficient cooling has been
3
the
position and fan speed
achieved, switch back from the
control to the lower speed.
recirculated air to the fresh outside
air position.
Blower
To help reduce moisture inside of
Heater core
the windows on rainy or humid
Climate control
Evaporator
air filter
core
days, decrease the humidity inside
1LDA5047
the vehicle by operating the air
This filter is installed behind the glove
conditioning system with the win-
box. It filters the dust or other pollu-
dows and sunroof closed.
tants that enter the vehicle through the
Use the air conditioning system
heating and air conditioning system.
every month only for a few minutes
Have the climate control air filter
to ensure maximum system per-
replaced by an authorized HYUNDAI
formance.
dealer according to the maintenance
schedule. If the car is being driven in
severe conditions such as dusty or
rough roads, more frequent air condi-
tioner filter inspections and changes
are required.
If the air flow rate suddenly decreas-
es, the system should be checked at
an authorized HYUNDAI dealer.
3-123
Convenient features of your vehicle
Checking the amount of air
Air conditioning refrigerant label
WARNING
conditioner refrigerant and
■ Example
compressor lubricant
Because the refriger-
When the amount of refrigerant is
ant is at very high
low, the performance of the air con-
pressure, the air con-
ditioning is reduced. Overfilling also
ditioning
system
has a negative influence on the air
should only be serv-
conditioning system.
iced by trained and certified
Therefore, if abnormal operation is
technicians. It is important that
found, have the system inspected by
the correct type and amount of
POE
an authorized HYUNDAI dealer.
oil and refrigerant is used, oth-
erwise damage to the vehicle
NOTICE
and personal injury may occur.
OLFP046583N
It is important that the correct
The actual Air Conditioning refriger-
type and amount of oil and refrig-
The air conditioning system should
ant label in the vehicle may differ
erant is used. Otherwise, damage
from the illustration.
be serviced by an authorized
to the compressor and abnormal
HYUNDAI dealer.
Each symbols and specification on
system operation may occur.
air conditioning refrigerant label
means as below :
1. Classification of refrigerant
2. Amount of refrigerant
3. Classification of Compressor lubri-
cant
Refer to chapter 8 for more detail
location of the air conditioning refrig-
erant label.
3-124
WINDSHIELD DEFROSTING AND DEFOGGING
For maximum defrosting, set the
To Defog Inside Windshield
WARNING
temperature control to the extreme
right/hot position and the fan speed
Windshield heating
control to the highest speed.
Do not use the
or
posi-
If warm air to the floor is desired
tion during cooling operation in
while defrosting or defogging, set the
extremely humid weather. The
mode to the floor-defrost position.
difference between the temper-
3
Before driving, clear all snow and
Type A
ature of the outside air and that
ice from the windshield, rear win-
of the windshield could cause
dow, side view mirrors, and all side
the outer surface of the wind-
Type B
windows.
shield to fog up, causing loss of
Clear all snow and ice from the
visibility could cause an acci-
hood and air inlet in the cowl grill to
OAEE046317L
dent resulting in serious injury
improve heater and defroster effi-
or death. In this case, set the
1. Select desired fan speed.
ciency and to reduce the probability
mode selection knob or button
of fogging up the inside of the wind-
2. Select desired temperature.
to the
position and fan
shield.
3. Press the defroster button (
).
speed control knob or button to
a lower speed.
4. The outside (fresh) air position will
be selected automatically.
If the outside (fresh) air position is
not selected automatically, adjust the
corresponding button manually.
If the
position is selected, lower
fan speed is adjusted to a higher fan
speed.
3-125
Convenient features of your vehicle
To Defrost Outside Windshield
Defogging Logic
Auto Defogging System
To reduce the probability of fogging
up the inside of the windshield, the
air intake or air conditioning are con-
trolled automatically according to
certain conditions such as
or
position. To cancel or return the
Type A
defogging logic, do the following.
1. Turn the POWER button to the ON
Type B
position.
2. Press the defroster button (
).
3. While pressing the air conditioning
OAEE046318L
OAEE046312N
button (A/C), press the air intake
1. Set the fan speed to the highest
control button at least 5 times with-
Auto defogging system reduces the
(extreme right) position.
in 3 seconds.
possibility of fogging up the inside of
the windshield by automatically
2. Set the temperature to the extreme
The air intake control button indicator
sensing the moisture of inside the
hot (HI) position.
will blink 3 times. It indicates that the
windshield.
3. Press the defroster button (
).
defogging logic is canceled or
returned to the programmed status.
The auto defogging system operates
4. The outside (fresh) air position will
when the heater or air conditioning is
be selected automatically.
on.
If the
position is selected, lower
If the battery has been discharged or
fan speed is adjusted to a higher fan
disconnected, it resets to the defog
i
Information
speed.
logic status.
The auto defogging system may not
operate normally, when the outside
temperature is below 50 °F (10 °C).
3-126
When the Auto Defogging
To cancel or reset the
NOTICE
System operates, the indi-
Auto Defogging System
cator will illuminate.
Do not remove the sensor cover
Press the front windshield defroster
located on the upper end of the
button for
3 seconds when the
windshield glass.
POWER button is in the ON position.
If higher level of moisture are sensed in
When the Auto Defogging System is
Damage to system parts could
the vehicle, the Auto Defogging System
canceled, ADS OFF symbol will blink
occur and may not be covered by
will operate in the following order:
3 times and the ADS OFF will be dis-
your vehicle warranty.
3
Step 1 : Outside air position
played on the climate control infor-
Step 2 : Operating the air conditioning
mation screen.
Step 3 : Blowing air toward the wind-
When the Auto Defogging System is
shield
reset, ADS OFF symbol will blink 6
Step 4 : Increasing air flow toward
times without a signal.
the windshield
If the air conditioning is off or recircu-
i
Information
lated air position is manually select-
• When the air conditioning is turned
ed while Auto Defogging System is
on by Auto defogging system, if you
ON, the Auto Defogging System
try to turn off the air conditioning, the
Indicator will blink 3 times to signal
indicator will blink 3 times and the air
that the manual operation has been
conditioning will not be turned off.
canceled.
• For efficiency, do not select recircu-
lated air position while Auto defog-
ging system is operating.
• When Auto defogging mode is
selected, fan speed, temperature and
intake mode which is adjusted man-
ually are canceled for better defog-
ging result.
3-127
Convenient features of your vehicle
CLIMATE CONTROL
STORAGE COMPARTMENT
ADDITIONAL FEATURES
Center Console Storage
WARNING
(IF EQUIPPED)
Automatic Ventilation
Never store cigarette lighters,
propane cylinders, or other
(if equipped)
flammable/explosive materials
When the POWER button is in the
in the vehicle. These items may
ON position or when the vehicle is in
catch fire and/or explode if the
the ready (
) mode and tempera-
vehicle is exposed to hot tem-
ture is below 59°F (15°C) with the
peratures for extended periods.
recirculated air position selected
more than five minutes, the air intake
position will automatically change to
WARNING
the outside (fresh) air position.
OAEE046418
ALWAYS keep the storage com-
partment covers closed secure-
To open :
To cancel or reset the Automatic
ly while driving. Items inside
Ventilation
Grab and hold the latch (1) on the
your vehicle are moving as fast
arm rest then lift the lid.
When the air conditioning system is
as the vehicle. If you have to
on, select Face Level
mode,
stop or turn quickly, or if there
press the recirculated air position
is a crash, the items may fly out
button for three seconds.
of the compartment and may
cause an injury if they strike the
driver or a passenger.
NOTICE
To avoid possible theft, do not
leave valuables in the storage
compartments.
3-128

Была ли эта страница вам полезна?
Да!Нет
4 посетителя считают эту страницу полезной.
Большое спасибо!
Ваше мнение очень важно для нас.

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

Текст

Политика конфиденциальности