Nissan Juke F15. Instruction — part 1013
![](/vehicle/qul/yoniol/qunoumchaing/yower.png)
PARKING BRAKE SHOE
PB-9
< REMOVAL AND INSTALLATION >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
PARKING BRAKE SHOE
Exploded View
INFOID:0000000012200169
Removal and Installation
INFOID:0000000012200170
REMOVAL
WARNING:
Since dust covering the parking brake has an affect on human body, the dust must be removed with a
dust collector. Never splatter the dust with an air blow gun.
1. Remove rear tires with power tool.
2. Remove disc rotor.
• 2WD: Refer to
RAX-7, "Removal and Installation"
.
• AWD: Refer to
RAX-16, "Removal and Installation"
.
CAUTION:
Parking brake completely in the released position.
1.
Anti-rattle pin
2.
Back plate
3.
Toggle lever
4.
Parking brake shoe
5.
Brake strut
6.
Return spring
7.
Spring
8.
Adjuster
: Apply PBC (Poly Butyl Cuprysil) grease or silicone-based grease.
JPFIB0086ZZ
![](/vehicle/qul/yoniol/qunoumchaing/wngber.png)
PB-10
< REMOVAL AND INSTALLATION >
PARKING BRAKE SHOE
3. Remove return spring (1) of the upper side.
4. Remove return spring (1) of the lower side.
5. Remove spring (1).
CAUTION:
Never drop the removed parts.
6. Remove parking brake shoes, adjuster, brake strut and toggle
lever.
CAUTION:
• The parking brake shoes for the front wheels are made of
different materials from those for the rear wheels. Never
misidentify them when removing.
• Never drop the removed parts.
7. Press the rear cable spring (1) against spring tension to remove
rear cable (3) from the clamp (A) of toggle lever (2).
CAUTION:
Never bend rear cable.
8. For the removal of back plate.
• 2WD: Refer to
RAX-7, "Removal and Installation"
.
• AWD: Refer to
RAX-16, "Removal and Installation"
.
INSTALLATION
Note the following, install in the reverse order of removal.
• Apply PBC (Poly Butyl Cuprysil) grease or silicone-based grease to the back plate and brake shoe.
CAUTION:
The parking brake shoes for the front wheels are made of different materials from those for the rear
wheels. Never misidentify them when removing and replacing.
JSFIA0485ZZ
JSFIA0486ZZ
JSFIA0487ZZ
JSFIA0488ZZ
![](/vehicle/qul/yoniol/qunoumchaing/seee.png)
PARKING BRAKE SHOE
PB-11
< REMOVAL AND INSTALLATION >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
• Assemble adjusters so that threaded part is expanded when rotat-
ing it in the direction shown by arrow.
• Shorten adjuster by rotating it.
• When disassembling apply PBC (Poly Butyl Cuprysil) grease or sil-
icone-based grease to threads.
• Check that the component parts of the parking brake shoe are
properly installed.
• Check brake shoe sliding surface and drum inner surface for
grease. Wipe it off if it adhere on the surfaces.
Inspection and Adjustment
INFOID:0000000012200171
INSPECTION AFTER REMOVAL
Lining Thickness Inspection
• Check thickness (A) of lining.
Drum Inner Diameter Inspection
• Check inner diameter (B) of drum.
Other Inspections
Check the following items, and replace the parts if necessary.
• Lining for excessive wear, damage, and peeling.
• Brake shoe sliding surface for excessive wear and damage.
• Anti-rattle pin for excessive wear, damage and rust.
• Return spring and spring for settling, excessive wear, damage, and rust.
A : For right side brake
B : For left side brake
: Vehicle front
: Adjuster expands
JPFIB0087ZZ
JSFIA0489ZZ
A
: Refer to
.
SBR021A
B
: Refer to
.
JPFIB0008ZZ
PB-12
< REMOVAL AND INSTALLATION >
PARKING BRAKE SHOE
• Adjuster for smoothness.
• Toggle lever and brake strut for excessive wear, damage and rust.
• Visually check inside of the drum for excessive wear, cracks, and damage with a pair of vernier calipers.
ADJUSTMENT AFTER INSTALLATION
1. Adjust the parking brake lever stroke. Refer to
PB-4, "Inspection and Adjustment"
.
2. Rotate the disc rotor to check that there is no drag. Install the plug. If any drag is found, follow the proce-
dure described below.
a. Adjust parking brake stroke again.
b. Check rear disc brake. Refer to
BR-67, "BRAKE CALIPER ASSEMBLY : Inspection"
.
3. Adjust the parking brake shoe. Refer to
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст