Nissan Murano Z51. Instruction — part 1204
SE-4
< BASIC INSPECTION >
DIAGNOSIS AND REPAIR WORK FLOW
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORK FLOW
Work Flow
INFOID:0000000005518127
DETAILED FLOW
1.
OBTAIN INFORMATION ABOUT SYMPTOM
Interview the customer to obtain the malfunction information (conditions and environment when the malfunc-
tion occurred) as much as possible when the customer brings the vehicle in.
>> GO TO 2.
2.
REPRODUCE THE MALFUNCTION INFORMATION
Check the malfunction on the vehicle that the customer describes.
Inspect the relation of the symptoms and the condition when the symptoms occur.
>> GO TO 3.
3.
IDENTIFY THE MALFUNCTIONING SYSTEM WITH “SYMPTOM DIAGNOSIS”
Use “Symptom diagnosis” from the symptom inspection result in step 2 and then identify where to start per-
forming the diagnosis based on possible causes and symptoms.
>> GO TO 4.
4.
IDENTIFY THE MALFUNCTIONING PARTS WITH “COMPONENT DIAGNOSIS”
Perform the diagnosis with “Component diagnosis” of the applicable system.
>> GO TO 5.
5.
REPAIR OR REPLACE THE MALFUNCTIONING PARTS
Repair or replace the specified malfunctioning parts.
>> GO TO 6.
6.
FINAL CHECK
Check that malfunctions are not reproduced when obtaining the malfunction information from the customer,
referring to the symptom inspection result in step 2.
Are the malfunctions corrected?
YES
>> INSPECTION END
NO
>> GO TO 3.
POWER SEAT
SE-5
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
SYSTEM DESCRIPTION
POWER SEAT
System Description
INFOID:0000000005518128
BCM can operate regardless of the ignition switch position, because battery power is supplied at all times to
power seat switch.
SLIDING OPERATION
While operating the sliding switch located in power seat switch, sliding motor operates and makes possible the
seat front and back position adjustment.
RECLINING OPERATION
While operating the reclining switch located in power seat switch, reclining motor operates and makes possi-
ble the seat back forward and backward position adjustment.
LIFTING OPERATION
While operating the lifting switch located in power seat switch, lifting motor operates and makes possible the
seat cushion up and down position adjustment.
Component Parts Location
INFOID:0000000005518129
1.
Sliding switch and lifting switch (driv-
er side) B414
2.
Reclining switch (driver side) B414
3.
Reclining motor (driver side) B415
4.
Lifting motor (rear) (driver side) B418 5.
Sliding motor (driver side) B416
6.
Lifting motor (front) (driver side) B417
A.
View with seat cushion pad and seat
back pad are removed.
B.
Back side of seat cushion
JMJIA1457ZZ
SE-6
< SYSTEM DESCRIPTION >
POWER SEAT
Component Description
INFOID:0000000005518130
Item
Function
BCM
Supplies at all times the power received from battery to power seat switch
Power seat switch
Built-in reclining switch, sliding switch and lifting switch, controls the power supplied to each motor
Reclining motor
With the power supplied from power seat switch, operates the forward and backward movement
of seatback
Sliding motor
With the power supplied from power seat switch, operates the forward and backward slide of seat
Lifting motor (front/rear)
With the power supplied from power seat switch, operates the up and down movement of seat
cushion
HEATED SEAT
SE-7
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
HEATED SEAT
System Description
INFOID:0000000005518131
Heated seat is a system that operates when ignition switch is in ON position.
HEATER OPERATION
• While operating the heated seat switch, seat cushion heater and seat back heater operate.
• Temperature of seat can be adjusted by operating on heated seat switch.
Component Parts Location
INFOID:0000000005518132
Component Description
INFOID:0000000005518133
1.
Front heated seat switch (passenger
side) M203
2.
Front heated seat switch (driver
side) M202
3.
Rear heated seat switch
• LH: D70
• RH: D72
4.
Seat back heater (front seat)
• Driver side B413
• Passenger side B433
5.
Seat cushion heater (front seat)
• Driver side B412
• Passenger side B432
6.
Seat back heater (rear seat)
7.
Seat cushion heater (rear seat)
8.
Heated seat relay (rear seat) M58
A.
View with glove box assembly removed
JMJIA1452ZZ
Item
Function
Heated seat switch
• Power is supplied to each heater
• Depending on LOW/HIGH position of switch, operating heater number is changeable
Seat cushion heater
Built-in seat cushion, the heater operates with the power supplied from heater seat switch
Seat back heater
Built-in seatback, the heater operates with the power supplied from heater seat switch
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст