Nissan Murano Z51. Instruction — part 1351
![](/vehicle/qul/ontil/com/male.png)
SRC-174
< ECU DIAGNOSIS INFORMATION >
[FOR USA AND CANADA]
DIAGNOSIS SENSOR UNIT
JCHWM0508GB
![](/vehicle/qul/ontil/com/boneve.png)
DIAGNOSIS SENSOR UNIT
SRC-175
< ECU DIAGNOSIS INFORMATION >
[FOR USA AND CANADA]
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
JCHWM0509GB
![](/vehicle/qul/ontil/com/jiglll.png)
SRC-176
< SYMPTOM DIAGNOSIS >
[FOR USA AND CANADA]
SRS AIR BAG WARNING LAMP DOES NOT TURN OFF
SYMPTOM DIAGNOSIS
SRS AIR BAG WARNING LAMP DOES NOT TURN OFF
Diagnosis Procedure
INFOID:0000000005513693
1.
CHECK FRONT AIR BAG MODULE
Check the deployment of front air bag module.
Is air bag module deployed?
YES
>> Refer to
SRC-147, "Diagnosis Procedure"
SRC-149, "Diagnosis Procedure"
NO
>> GO TO 2.
2.
CHECK AIR BAG FUSE
Check the air bag fuse. Refer to
PG-114, "Fuse and Fusible Link Arrangement"
Is 10A fuse [No.2, located in fuse block (J/B)] normal?
YES
>> GO TO 4.
NO
>> GO TO 3.
3.
CHECK AIR BAG FUSE AGAIN
Replace air bag fuse and turn ignition switch ON.
Did the air bag fuse blow again?
YES
>> Repair or replace main harness.
NO
>> INSPECTION END
4.
CHECK AIR BAG DIAGNOSIS SENSOR UNIT
Check the screen of CONSULT-III.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Replace air bag diagnosis sensor unit. Refer to
SR-25, "Removal and Installation"
.
5.
CHECK HARNESS CONNECTION
Check harness connection between air bag warning lamp and air bag diagnosis sensor unit.
Is the inspection result normal?
YES
>> Check the intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
NO
>> Replace wiring harness connector.
![](/vehicle/qul/ontil/com/ele.png)
SRS AIR BAG WARNING LAMP DOES NOT TURN ON
SRC-177
< SYMPTOM DIAGNOSIS >
[FOR USA AND CANADA]
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
SRS AIR BAG WARNING LAMP DOES NOT TURN ON
Diagnosis Procedure
INFOID:0000000005513694
1.
CHECK METER FUSE
Check the meter fuse. Refer to
PG-114, "Fuse and Fusible Link Arrangement"
Is 10A fuse [No.4, located in fuse block (J/B)] normal?
YES
>> GO TO 3.
NO
>> GO TO 2.
2.
CHECK METER FUSE AGAIN
Replace 10A fuse [No.4, located in fuse block (J/B)] and turn ignition switch ON.
Did the meter fuse blow again?
YES
>> Repair or replace the related harness.
NO
>> INSPECTION END
3.
CHECK HARNESS CONNECTION
1.
Check harness connection between air bag diagnosis sensor unit and combination meter.
2.
Disconnect air bag diagnosis sensor unit connector and turn ignition switch ON.
Did air bag warning lamp turn ON?
YES
>> Replace air bag diagnosis sensor unit. Refer to
SR-25, "Removal and Installation"
.
NO
>> Replace combination meter assembly. Refer to
MWI-103, "Removal and Installation"
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст