Nissan Murano Z51. Instruction — part 54
ADP-208
< PRECAUTION >
PRECAUTIONS
with a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly
causing serious injury.
• When using air or electric power tools or hammers, always switch the ignition OFF, disconnect the
battery, and wait at least 3 minutes before performing any service.
![](/vehicle/qul/ontil/crru/elan.png)
DRIVER SEAT CONTROL UNIT
ADP-209
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
REMOVAL AND INSTALLATION
DRIVER SEAT CONTROL UNIT
Exploded View
INFOID:0000000005515442
.
Removal and Installation
INFOID:0000000005515443
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.
Remove the driver seat (1). Refer to
.
2.
Remove the mounting nut (A).
3.
Remove driver seat control unit (2).
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be sure to clump the harness to the right place.
NOTE:
After installing the driver seat, perform additional service when replacing control unit. Refer to
TIONAL SERVICE WHEN REPLACING CONTROL UNIT : Description"
JMJIA1449ZZ
![](/vehicle/qul/ontil/crru/yoreth.png)
ADP-210
< REMOVAL AND INSTALLATION >
AUTOMATIC DRIVE POSITIONER CONTROL UNIT
AUTOMATIC DRIVE POSITIONER CONTROL UNIT
Exploded View
INFOID:0000000005515444
.
Removal and Installation
INFOID:0000000005515445
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.
Remove the instrument driver lower panel. Refer to
2.
Remove the screws (A).
3.
Remove automatic drive positioner control unit (1).
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be sure to clump the harness to the right place.
NOTE:
After installing the driver seat, perform additional service when removing battery negative terminal. Refer to
ADP-8, "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Description"
.
JMJIA1388ZZ
![](/vehicle/qul/ontil/crru/ndakn.png)
SEAT MEMORY SWITCH
ADP-211
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
SEAT MEMORY SWITCH
Exploded View
INFOID:0000000005515446
INT-12, "FRONT DOOR FINISHER : Exploded View"
.
Removal and Installation
INFOID:0000000005515447
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.
Remove the seat memory finisher (1). Refer to
DOOR FINISHER : Removal and Installation"
.
2.
Press pawls and remove seat memory switch (2) from seat
memory finisher (1).
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be sure to clump the harness to the right place.
NOTE:
After installing the driver seat, perform additional service when removing battery negative terminal. Refer to
ADP-8, "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Description"
.
:
Pawl
JMJIA1450ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст