Nissan Sentra. Instruction — part 322
DMS-60
< SYSTEM DESCRIPTION >
[SPORT MODE (CVT)]
COMPONENT PARTS
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000009755936
COMPONENT DESCRIPTION
Instrument lower finisher
JSOIA0680ZZ
No.
Component
Function
Combination meter
• The combination meter transmittes the following signal via CAN communications
to the TCM.
- SPORT mode switch signal
• The combination meter receives the following signal via CAN communications
from the ECM.
- SPORT mode indicator signal
Refer to
MWI-5, "METER SYSTEM : Component Parts Location"
for detailed instal-
lation location.
Electric throttle control actuator
EC-22, "Electric Throttle Control Actuator"
.
DMS
COMPONENT PARTS
DMS-61
< SYSTEM DESCRIPTION >
[SPORT MODE (CVT)]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
SPORT Mode Switch
INFOID:0000000009755937
• The SPORT mode switch is installed to the instrument lower fin-
isher.
• When the SPORT mode indicator lamp on the combination meter
is OFF and the SPORT mode switch is pressed, the SPORT mode
is active and the SPORT mode indicator lamp is ON.
• When the SPORT mode indicator lamp on the combination meter
is ON and the SPORT mode switch is pressed, the SPORT mode
is cancelled and the SPORT mode indicator lamp is OFF.
SPORT Mode Indicator Lamp
INFOID:0000000009755938
DESIGN/PURPOSE
The SPORT mode indicator lamp inform the driver that the vehicle is
in SPORT mode.
BULB CHECK
Not applicable
SIGNAL PATH
• TCM receives SPORT mode switch signal (ON/OFF) from combination meter via CAN communication.
Based on the signal, TCM transmits SPORT mode signal to ECM via CAN communication.
• ECM transmits SPORT mode indicator signal to combination meter via CAN communication. Based on the
signal, combination meter illuminates SPORT mode indicator lamp.
LIGHTING CONDITION
When all of the following conditions are satisfied.
• Ignition switch: ON
• The SPORT mode switch is pressed when the SPORT mode indicator lamp is OFF
ECM
• The ECM receives the following signal via CAN communications from the TCM.
- SPORT mode signal
• The ECM transmittes the following signal via CAN communications to the combi-
nation meter.
- SPORT mode indicator signal
Refer to
EC-15, "ENGINE CONTROL SYSTEM : Component Parts Location"
for
detailed installation location.
Transaxle assembly
Refer to
TM-73, "CVT CONTROL SYSTEM : Component Parts Location"
.
TCM
• The TCM receives the following signal via CAN communications from the combi-
nation meter.
- SPORT mode switch signal
• The TCM transmittes the following signal via CAN communications to the ECM.
- SPORT mode signal
Refer to
TM-73, "CVT CONTROL SYSTEM : Component Parts Location"
for detailed
installation location.
SPORT mode switch
Refer to
.
No.
Component
Function
JSOIA0686ZZ
JPNIA1895ZZ
DMS-62
< SYSTEM DESCRIPTION >
[SPORT MODE (CVT)]
COMPONENT PARTS
SHUTOFF CONDITION
When any of the condition listed below is satisfied.
• Ignition switch: Other than ON
• The SPORT mode switch is pressed when the SPORT mode indicator lamp is ON.
• The ECO mode switch is pressded when the SPORT mode indicator lamp is ON.
DMS
SYSTEM
DMS-63
< SYSTEM DESCRIPTION >
[SPORT MODE (CVT)]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
SYSTEM
SPORT MODE CONTROL
SPORT MODE CONTROL : System Description
INFOID:0000000009755939
SYSTEM DIAGRAM
SYSTEM DISCRIPTION
• TCM receive SPORT mode switch signal (ON/OFF) from combination meter via CAN communication. TCM
transmit SPORT mode signal to ECM via CAN communication according to the signal.
• ECM transmit SPORT mode indicator signal to combination meter via CAN communication. Combination
meter illuminates SPORT mode indicator lamp according to the signal.
Each ECU Control
• For TCM control, refer to
TM-104, "SPORT MODE CONTROL : System Description"
• For ECM control, refer to
EC-53, "SPORT MODE CONTROL : System Description"
.
JSOIA0681GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст