Nissan Sentra. Instruction — part 479
FRONT COMBINATION LAMP
EXL-119
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
REMOVAL AND INSTALLATION
FRONT COMBINATION LAMP
Exploded View
INFOID:0000000009757544
Removal and Installation
INFOID:0000000009757545
REMOVAL
1. Remove the front bumper fascia. Refer to
EXT-17, "Removal and Installation"
.
1.
Large cover (not serviceable)
2. Small cover (not serviceable)
3.
Front combination lamp
4.
Halogen lamp bulb (high beam)
5. Turn signal lamp bulb
6.
Turn signal lamp bulb socket
7.
LED harness connector
8. Halogen lamp bulb (high beam)
harness connector
9.
Halogen lamp bulb (low beam)
harness connector
10. Halogen lamp bulb (low beam)
11. Side marker lamp bulb socket
12. Side marker lamp bulb
ALLIA1203ZZ
EXL-120
< REMOVAL AND INSTALLATION >
FRONT COMBINATION LAMP
2. Remove the front combination lamp bolts (A).
3. Pull the front combination lamp (1) forward.
4. Disconnect the harness connectors from the front combination
lamp (1).
INSTALLATION
Installation is in the reverse order of removal.
After installation, perform headlamp aiming adjustment. Refer to
.
Bulb Replacement
INFOID:0000000009757546
WARNING:
Do not touch bulb by hand while it is lit or right after being turned off. Burning may result.
CAUTION:
• Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent
damage to bulb.
• Do not leave the bulb out of the lamp reflector for a long time because dust, moisture, smoke, etc.
may affect the performance of the lamp.
HEADLAMP HIGH BEAM
Removal
1. Remove the core support cover. Refer to
2. Rotate the plastic cover counterclockwise and remove.
3. Rotate the headlamp high beam lamp counterclockwise and remove.
4. Disconnect the harness connector from the headlamp high beam lamp.
Installation
Installation is in the reverse order of removal.
CAUTION:
After installing, be sure to install the cover securely to ensure watertightness.
HEADLAMP LOW BEAM
Removal
1. Remove the core support cover. Refer to
2. Rotate the plastic cover counterclockwise and remove.
3. Rotate the headlamp low beam sockets counterclockwise and remove.
4. Disconnect the harness connector from the headlamp low beam lamp.
Installation
Installation is in the reverse order of removal.
ALLIA1204ZZ
FRONT COMBINATION LAMP
EXL-121
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
CAUTION:
After installing, be sure to install the cover securely to ensure watertightness.
SIDE MARKER LAMP
Removal
1. Remove the core support cover. Refer to
2. Rotate the side marker lamp bulb socket counterclockwise and remove.
3. Remove the side marker bulb from the side marker bulb socket.
Installation
Installation is in the reverse order of removal.
CAUTION:
After installing, be sure to install the bulb socket securely to ensure watertightness.
TURN SIGNAL LAMP
Removal
1. Remove the core support cover. Refer to
2. Rotate the turn signal lamp bulb socket counterclockwise and remove.
3. Remove the turn signal bulb from the turn signal bulb socket.
Installation
Installation is in the reverse order of removal.
CAUTION:
After installing, be sure to install the bulb socket securely to ensure watertightness.
Park Lamp
The park lamp LED bulb is integrated into the front combination lamp and is serviced as an assembly. Refer to
EXL-122
< REMOVAL AND INSTALLATION >
FRONT FOG LAMP
FRONT FOG LAMP
Removal and Installation
INFOID:0000000009757547
FOG LAMP
Removal
1. Position the fender protector aside. Refer to
EXT-28, "FENDER PROTECTOR : Removal and Installation
2. Disconnect the harness connector from the front fog lamp.
3. Remove the screws and the front fog lamp.
Installation
Installation is in the reverse order of removal.
NOTE:
After installing, perform fog lamp aiming adjustment. Refer to
.
FRONT FOG LAMP BULB
Removal
WARNING:
Do not touch bulb by hand while it is lit or right after being turned off. Burning may result.
CAUTION:
• Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent
damage to bulb.
• Do not leave the bulb out of the lamp reflector for a long time because dust, moisture, smoke, etc.
may affect the performance of the lamp.
1. Position the front fender protector aside. Refer to
EXT-28, "FENDER PROTECTOR : Removal and Instal-
lation - Front Fender Protector"
2. Disconnect the harness connector from the front fog lamp bulb.
3. Rotate the front fog lamp bulb socket counterclockwise and remove.
Installation
Installation is in the reverse order of removal.
CAUTION:
After installing, be sure to install the bulb socket securely to ensure watertightness.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст