Nissan Sentra. Instruction — part 513
IDENTIFICATION INFORMATION
GI-23
< VEHICLE INFORMATION >
C
D
E
F
G
H
I
J
K
L
M
B
GI
N
O
P
Identification Number
INFOID:0000000009759189
Vehicle Identification Number Arrangement
1. Vehicle identification number (VIN)
plate
2. Vehicle identification number
(chassis number)
3. Emission control information label
4. Air Conditioner specification label
5. F.M.V.S.S./C.M.V.S.S. certification
label
6. Tire and loading information label
ALAIA0073ZZ
Position
Character
Qualifier
Definition
1
3N1
Manufacturer
1N4: NISSAN passenger car [NNA]
3N1: NISSAN passenger car [Nismex]
2
3
4
A
Engine type
A: MRA8DE
5
B7
Model code
B7: B17 (Sentra)
6
7
A
Body type
A: 4 door sedan
8
P
Restraint system
P: (5 seating capacity)
• (Driver and Passenger) 3-Point Instruction Belts, Frontal Air Bags, Side Air Bags
and Curtain Side Air Bags.
• (2nd Row Outboard): 3-Point Instruction Belts and Curtain Side Air Bags.
• (2nd Row Center): 3-Point Instruction Belt.
9
*
Check digit
(0 to 9 or X) The code for the check digit is determined by a mathematical com-
putation.
10
E
Model year
E: 2014
11
L
Manufacturing
plant
L: Aguascalientes, Mexico
Y: Aguascalientes, Mexico
N: Canton, Mississippi
GI-24
< VEHICLE INFORMATION >
IDENTIFICATION INFORMATION
Identification Plate
INFOID:0000000009759190
Engine Serial Number
INFOID:0000000009759191
MRA8DE
: Vehicle front
12
XXXXX
Vehicle serial num-
ber
Chassis number
13
14
15
16
17
Position
Character
Qualifier
Definition
LAIA0027E
ALAIA0113ZZ
IDENTIFICATION INFORMATION
GI-25
< VEHICLE INFORMATION >
C
D
E
F
G
H
I
J
K
L
M
B
GI
N
O
P
CVT Number
INFOID:0000000009759192
: Vehicle front
Instruction Transaxle Number
INFOID:0000000009759193
: Vehicle front
Dimensions
INFOID:0000000009759194
Unit: mm (in)
Wheels & Tires
INFOID:0000000009759195
Unit: mm (in)
JPAIA0812ZZ
SAIA1338E
Overall length
All except SR grades
4,625 (182.1)
SR grades
4,635 (182.5)
Overall width
1,760 (69.3)
Overall height
1,495 (58.9)
Front tread
1,530 (60.2)
Rear tread
1,530 (60.2)
Wheelbase
2700 (106.3)
Conventional
Spare
Road wheel/offset
16 X 6.5J Steel/45 (1.77)
16x4T
16 X 6.5J Cast Aluminum/45 (1.77)
17 X 6.5J Cast Aluminum/45 (1.77)
Tire size
P205/55R16
T125/70D16
P205/50R17
GI-26
< PRECAUTION >
PRECAUTIONS
PRECAUTION
PRECAUTIONS
Description
INFOID:0000000009759196
Observe the following precautions to ensure safe and proper servicing. These precautions are not
described in each individual section.
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000009759197
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. Information necessary to service the system safely is included in the SR and SB section of
this Instruction.
WARNING:
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the SR section.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Instruction. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
• When working near the Airbag Diagnosis Sensor Unit or other Airbag System sensors with the Igni-
tion ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s) with a
hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers, always switch the Ignition OFF, disconnect the
battery and wait at least 3 minutes before performing any service.
Procedures without Cowl Top Cover
INFOID:0000000009759198
When performing the procedure after removing cowl top cover, cover
the lower end of windshield with urethane, etc.
Cautions in Removing Battery Terminal and AV Control Unit
INFOID:0000000010283525
CAUTION:
Remove battery terminal and AV control unit after a lapse of 30 seconds or more after turning the igni-
tion switch OFF.
NOTE:
After the ignition switch is turned OFF, the AV control unit continues operating for approximately 30 seconds.
Therefore, data corruption may occur if battery voltage is cut off within 30 seconds.
PIIB3706J
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст