Nissan Sentra. Instruction — part 498
FL-14
< REMOVAL AND INSTALLATION >
EVAP CANISTER
EVAP CANISTER
Exploded View
INFOID:0000000009756233
1.
EVAP canister bracket
2.
EVAP canister filter drain hose
3.
EVAP canister filter
4.
EVAP canister protector
5.
EVAP hose
6.
EVAP canister vent control valve
7.
O-ring
8.
EVAP canister
9.
O-ring
10. EVAP canister control pressure sensor A.
Clip
B.
Nut
AWBIA1931ZZ
EVAP CANISTER
FL-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
L
M
A
FL
N
P
O
Removal and Installation
INFOID:0000000009756234
EVAP CANISTER
Removal
1. Remove EVAP canister protector.
2. Disconnect the harness connector from EVAP canister control pressure sensor.
3. Remove the EVAP canister control pressure sensor and O-ring, if necessary.
CAUTION:
Do not reuse O-ring.
4. Disconnect EVAP canister purge hose.
5. Disconnect fuel tank EVAP breather hose.
6. Disconnect the harness connector from EVAP vent control valve.
7. Disconnect the EVAP vent control valve hose.
8. Remove the EVAP canister bolt.
9. Remove the EVAP canister.
10. Remove the EVAP vent control valve and O-ring, if necessary.
CAUTION:
Do not reuse O-ring.
Installation
Installation is in the reverse order of removal.
CAUTION:
Do not reuse O-ring.
EVAP CANISTER CONTROL PRESSURE SENSOR
Removal
1. Remove EVAP canister protector.
2. Disconnect the EVAP control pressure sensor harness connec-
tor (1).
3. Remove the EVAP canister control pressure sensor and O-ring.
CAUTION:
Do not reuse O-ring.
Installation
Installation is in the reverse order of removal.
CAUTION:
Do not reuse O-ring.
EVAP CANISTER VENT CONTROL VALVE
Removal
1. Remove EVAP canister protector.
2. Disconnect the harness connector from EVAP vent control valve.
3. Disconnect the EVAP vent control valve hose.
ALBIA1007ZZ
FL-16
< REMOVAL AND INSTALLATION >
EVAP CANISTER
4. Turn EVAP canister vent control valve counterclockwise.
(A): Clock
(B): Unclock
5. Remove the EVAP canister vent control valve and O-ring.
CAUTION:
Do not reuse O-ring.
Installation
Installation is in the reverse order of removal.
CAUTION:
Do not reuse O-ring.
EVAP CANISTER FILTER
Removal
1. Remove EVAP canister protector.
2. Disconnect the EVAP canister filter drain hose (1).
3. Disconnect the EVAP hose (2).
4. Remove the EVAP canister filter.
Installation
Installation is in the reverse order of removal.
AWBIA1932ZZ
ALBIA1009ZZ
FUEL LEVEL SENSOR UNIT
FL-17
< DISASSEMBLY AND ASSEMBLY >
C
D
E
F
G
H
I
J
K
L
M
A
FL
N
P
O
DISASSEMBLY AND ASSEMBLY
FUEL LEVEL SENSOR UNIT
Exploded View
INFOID:0000000009756235
Fuel Level Sensor Unit
Disassembly and Assembly
INFOID:0000000009756236
DISASSEMBLY
1. Disconnect fuel level sensor unit/fuel tank temperature sensor
harness connector (1).
NOTE:
Hold connector with your fingers, because there is no tab for
releasing stopper. Pull it out straight downward.
ALBIA0955ZZ
1.
Fuel filter and pump assembly 2.
Fuel level sensor unit
3.
Float arm assembly
4.
Fuel tank temperature sensor 5.
Fuel level sensor unit/fuel tank temperature sensor harness con-
nector
ALBIA0952ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст