Nissan Qashqai (2007-2010). Manual — part 774
SR-8
< ON-VEHICLE REPAIR >
FRONT PASSENGER AIR BAG MODULE
FRONT PASSENGER AIR BAG MODULE
Exploded View
INFOID:0000000001069725
Removal and Installation
INFOID:0000000001069726
REMOVAL
CAUTION:
• Before servicing, turn ignition switch OFF, disconnect both battery terminals and wait at least 3 min-
utes.
• Always work from the side of air bag module. Do not work in front of it.
• Do not use air tools or electric tools for servicing.
1.
Remove the glove box assemblies. Refer to
IP-12, "Removal and Installation"
.
2.
Remove the Instrument lower assist panel. Refer to
IP-12, "Removal and Installation"
.
3.
Disconnect passenger air bag module harness connector (A).
4.
Remove the passenger air bag module fixing bolts.
JMHIA0195GB
1.
Passenger air bag modulel
2.
Instrument panel ASSY
Refer to
for symbols in the figure.
(1): Passenger air bag module
JMHIA0196ZZ
FRONT PASSENGER AIR BAG MODULE
SR-9
< ON-VEHICLE REPAIR >
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
5.
Disconnect pawls (A)(B), and then remove passenger air bag
module.
CAUTION:
• Always place air bag module with pad side facing upward.
• Do not insert any foreign objects (screwdriver, etc.) into air
bag module.
• Do not disassemble air bag module.
• Do not use old fixing bolts after removal; replace with new
bolts.
• Do not expose the air bag module to temperatures exceeding
90
°
C (194
°
F).
• Do not allow oil, grease or water to come in contact with the
air bag module.
• Replace the air bag module if it has been dropped or sus-
tained an impact.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• Do not damage the harness while installing.
• In case that malfunction is detected by the air bag warning lamp, reset by the self-diagnosis function
and delete the memory by CONSULT-III.
• In case that malfunction is still detected after the above operations, perform self-diagnosis to repair
malfunctions.
• After the work is completed, check that no malfunctioning system is detected by air bag warning
lamp. Refer to
SRC-10, "Diagnosis Description"
.
: Vehicle front
JMHIA0197ZZ
: Upward
JMHIA0198ZZ
JMHIA0009ZZ
SR-10
< ON-VEHICLE REPAIR >
SIDE CURTAIN AIR BAG MODULE
SIDE CURTAIN AIR BAG MODULE
Exploded View
INFOID:0000000001081123
Removal and Installation
INFOID:0000000001081124
REMOVAL
CAUTION:
• Before servicing, turn ignition switch OFF, disconnect both battery terminals and wait at least 3 min-
utes.
• Do not use air tools or electric tools for servicing.
1.
Remove the headlining. Refer to
INT-21, "Removal and Installation"
.
2.
Remove the side curtain air bag module connector.
3.
Remove the side air bag module fixing bolts and clips.
4.
Remove the side curtain air bag module.
CAUTION:
• Do not insert any foreign objects (screwdriver, etc.) into air bag module.
• Do not disassemble air bag module.
• Do not use old fixing nut after removal; replace with new bolts.
• Do not expose the air bag module to temperatures exceeding 90
°
C (194
°
F).
• Do not allow oil, grease or water to come in contact with the air bag module.
JMHIA0199GB
1.
Side curtain air bag module
2.
Side curtain air bag inflator
: Clip
: Metal clip
Refer to
for symbols in the figure.
PHIA0953J
SIDE CURTAIN AIR BAG MODULE
SR-11
< ON-VEHICLE REPAIR >
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
• Replace the air bag module if it has been dropped or sus-
tained an impact.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• Do not damage the air bag harness.
• In case that malfunction is detected by the air bag warning lamp, reset by the self-diagnosis function
and delete the memory by CONSULT-III.
• In case that malfunction is still detected after the above operations, perform self-diagnosis to repair
malfunctions.
• After the work is completed, check that no malfunctioning system is detected by air bag warning
lamp. Refer to
SRC-10, "Diagnosis Description"
.
JMHIA0009ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст