Nissan Qashqai (2007-2010). Manual — part 699
PB-4
< ON-VEHICLE MAINTENANCE >
PARKING BRAKE SHOE
PARKING BRAKE SHOE
Inspection
INFOID:0000000000925853
Rotate the disc rotor and check for any drag.
![](/vehicle/qul/ene/roryboritele/erearullicry.png)
PARKING BRAKE CONTROL
PB-5
< ON-VEHICLE REPAIR >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
ON-VEHICLE REPAIR
PARKING BRAKE CONTROL
Exploded View
INFOID:0000000000925857
Removal and Installation
INFOID:0000000000925858
REMOVAL
1.
Remove rear tires.
2.
Remove center console. Refer to
3.
Disconnect parking brake switch harness connector.
4.
Remove adjusting nut and loosen front cable.
5.
Remove device assembly.
6.
Remove the heat insulator and center muffler. Refer to
(MR20DE engine models),
(K9K engine models).
7.
Separate front cable from rear cable, and remove front cable.
8.
Remove parking brake shoe, and remove rear cable from toggle lever. Refer to
9.
Remove rear cable mounting bolts pull out rear cable from vehicle.
INSTALLATION
Install in the reverse order of the removal.
Adjustment
INFOID:0000000000925859
1.
Adjusting nut
2.
Device assembly
3.
Front cable
4.
Rear cable (LH)
5.
Rear cable (RH)
: Apply multi-purpose grease.
Refer to
for symbols not described on the above.
JPFIB0012GB
PB-6
< ON-VEHICLE REPAIR >
PARKING BRAKE CONTROL
ADJUSTMENT AFTER INSTALLATION
Adjust the parking brake lever stroke. Refer to
![](/vehicle/qul/ene/roryboritele/xion.png)
PARKING BRAKE SHOE
PB-7
< ON-VEHICLE REPAIR >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
PARKING BRAKE SHOE
Exploded View
INFOID:0000000000925860
Removal and Installation
INFOID:0000000000925861
REMOVAL
WARNING:
Clean any dust from the parking brake shoes and brake plates with a vacuum dust collector. Never
blow with compressed air.
1.
Remove rear tires.
2.
Remove disc rotor with parking brake completely in the released position. Refer to
PER ASSEMBLY : Removal and Installation"
BR-87, "BRAKE CALIPER ASSEMBLY : Removal
CAUTION:
• Put matching marks on the disc rotor and the wheel hub and bearing assembly when reusing the
disc rotor.
• Never drop disc rotor.
3.
If disc rotor cannot be removed, remove as follows:
a.
Fix the disc rotor with wheel nuts and remove the adjusting hole plug.
1.
Anti-rattle pin
2.
Parking brake shoe
3.
Toggle lever
4.
Return spring
5.
Brake strut
6.
Spring
7.
Adjuster
: Apply PBC (Poly Butyl Cuprysil) grease or silicone-based grease.
JPFIB0019ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст