Nissan Qashqai (2007-2010). Manual — part 464

P0500 VSS

EC-1375

< COMPONENT DIAGNOSIS >

[K9K]

C

D

E

F

G

H

I

J

K

L

M

A

EC

N

P

O

P0500 VSS

Description

INFOID:0000000000956135

The vehicle speed signal is sent to the combination meter from the “ABS actuator and electric unit (control
unit)” by CAN communication line. The combination meter then sends a signal to the ECM by CAN communi-
cation line.

DTC Logic

INFOID:0000000001115083

DTC DETECTION LOGIC

Diagnosis Procedure

INFOID:0000000000956137

1.

CHECK CAN COMMUNICATION LINE

Refer to

LAN-59, "CAN Communication Signal Chart"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace

2.

CHECK DTC WITH “ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)”

Refer to

BRC-17, "CONSULT-III Function (ABS)"

(with out ESP) or

BRC-96, "CONSULT-III Function (ABS)"

(with ESP).

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace.

3.

CHECK COMBINATION METER

Refer to

MWI-23, "CONSULT-III Function (METER/M&A)"

.

>> INSPECTION END

DTC No.

Trouble diagnosis name

Possible cause

P0500

VEHICLE SPEED SIGNAL
• 1.DEF: Value outside level

• Harness or connectors

(The CAN communication line is open or shorted)

• Harness or connectors

(The vehicle speed signal circuit is open or shorted)

• Wheel sensor
• Combination meter
• ABS actuator and electric unit (control unit)

EC-1376

< COMPONENT DIAGNOSIS >

[K9K]

P0530 REFRIGERANT PRESSURE SENSOR

P0530 REFRIGERANT PRESSURE SENSOR

Description

INFOID:0000000001115155

The refrigerant pressure sensor is installed at the condenser of the air conditioner system. The sensor uses an
electrostatic volume pressure transducer to convert refrigerant pressure to voltage. The voltage signal is sent
to ECM, and ECM controls cooling fan system.

DTC Logic

INFOID:0000000001115084

DTC DETECTION LOGIC

NOTE:
If DTC P0530 is displayed with DTC P0641, first perform the trouble diagnosis for DTC P0641 Refer to

EC-1393, "DTC Logic"

.

Diagnosis Procedure

INFOID:0000000000956142

1.

CHECK GROUND CONNECTIONS

1.

Turn ignition switch OFF.

2.

Check ground connection E17. Refer to Ground inspection in

GI-41, "Circuit Inspection"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace ground connection.

2.

CHECK REFRIGERANT PRESSURE SENSOR POWER SUPPLY CIRCUIT

1.

Disconnect refrigerant pressure sensor harness connector.

2.

Turn ignition switch ON.

3.

Check the voltage between refrigerant pressure sensor connector and ground.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> GO TO 3.

3.

DETECT MALFUNCTIONING PART

Check the following.
• Harness connector E6, F123
• Harness for open or short between ECM and refrigerant pressure sensor

>> Repair open circuit or short to ground or short to power in harness or connectors.

4.

CHECK REFRIGERANT PRESSURE SENSOR GROUND CIRCUIT FOR OPEN AND SHORT

1.

Turn ignition switch OFF.

2.

Disconnect ECM harness connector.

3.

Check the continuity between refrigerant pressure sensor harness connector and ECM harness connec-
tor.

DTC No.

Trouble diagnosis name

Possible cause

P0530

REFRIGERANT PRESSURE SENSOR CIRCUIT
• CO.0: Short circuit to +12V or open circuit
• CC.1: Short circuit to ground

• Harness or connectors

(Refrigerant pressure sensor circuit is
open or shorted.)

• Refrigerant pressure sensor

Refrigerant pressure sensor

Ground

Voltage

Connector

Terminal

E50

3

Ground

Approx. 5V

P0530 REFRIGERANT PRESSURE SENSOR

EC-1377

< COMPONENT DIAGNOSIS >

[K9K]

C

D

E

F

G

H

I

J

K

L

M

A

EC

N

P

O

4.

Also check harness for short to ground and short to power.

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> GO TO 5.

5.

DETECT MALFUNCTIONING PART

Check the following.
• Harness connector E6, F123
• Harness for open or short between ECM and refrigerant pressure sensor

>> Repair open circuit or short to ground or short to power in harness or connectors.

6.

CHECK REFRIGERANT PRESSURE SENSOR INPUT SIGNAL CIRCUIT FOR OPEN AND SHORT

1.

Check the continuity between refrigerant pressure sensor harness connector and ECM harness connec-
tor.

2.

Also check harness for short to ground and short to power.

Is the inspection result normal?

YES

>> GO TO 8.

NO

>> GO TO 7.

7.

DETECT MALFUNCTIONING PART

Check the following.
• Harness connector E6, F123
• Harness for open or short between ECM and refrigerant pressure sensor

>> Repair open circuit or short to ground or short to power in harness or connectors.

8.

CHECK INTERMITTENT INCIDENT

Refer to

GI-39, "Intermittent Incident"

.

Is the inspection result normal?

YES

>> Replace refrigerant pressure sensor.

NO

>> Repair or replace.

Refrigerant pressure sensor

ECM

Continuity

Connector

Terminal

Connector

Terminal

E50

1

F68

74

Existed

Refrigerant pressure sensor

ECM

Continuity

Connector

Terminal

Connector

Terminal

E50

2

F68

78

Existed

EC-1378

< COMPONENT DIAGNOSIS >

[K9K]

P0560 BATTERY VOLTAGE

P0560 BATTERY VOLTAGE

DTC Logic

INFOID:0000000001115085

DTC DETECTION LOGIC

NOTE:
Conditions for applying the diagnostic procedure to the stored DTCs:

The DTC is declared present when the engine is running.

Diagnosis Procedure

INFOID:0000000000956409

1.

CHECK BATTERY VOLTAGE

1.

Turn ignition switch ON.

2.

Check battery voltage.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Recharge the battery.

2.

CHECK BATTERY TERMINALS

1.

Turn ignition switch OFF.

2.

Check battery terminals condition.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair the battery terminals.

3.

CHECK BATTERY AND ALTERNATOR

Check that the proper type of battery and type of alternator are installed.
Refer to,

STR-8, "System Diagram"

and

CHG-8, "System Diagram"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Replace with a proper one.

4.

CHECK ECM POWER SUPPLY CIRCUIT-I

Check the voltage between ECM harness connector and ground.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> GO TO 7.

5.

CHECK ECM POWER SUPPLY CIRCUIT-II

1.

Disconnect ECM harness connector.

2.

Disconnect IPDM E/R harness connector E11.

DTC No.

Trouble diagnosis name

Possible cause

P0560

BATTERY VOLTAGE
• 1.DEF: Signal outside lower level
• 2.DEF: Signal outside upper level

• Harness connectors

(ECM power supply circuit is open or
shorted.)

• Battery
• Battery terminal
• Alternator
• IPDM E/R

Voltage: Above 11V

ECM

Ground

Voltage

Connector

Terminal

F68

60

Ground

Battery voltage

Была ли эта страница вам полезна?
Да!Нет
2 посетителя считают эту страницу полезной.
Большое спасибо!
Ваше мнение очень важно для нас.

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

Текст

Политика конфиденциальности