Nissan Qashqai (2007-2010). Manual — part 1262
![](/vehicle/qul/ene/roryboritele/yel.png)
SEC-248
< ON-VEHICLE MAINTENANCE >
[WITHOUT INTELLIGENT KEY SYSTEM]
PRE-INSPECTION FOR DIAGNOSTIC
ON-VEHICLE MAINTENANCE
PRE-INSPECTION FOR DIAGNOSTIC
Basic Inspection
INFOID:0000000001116849
1.
INSPECTION START
Turn ignition switch “OFF” and pull out ignition key from key cylinder.
NOTE:
Before starting operation check, open front windows.
>> GO TO 2.
2.
CHECK SECURITY INDICATOR LAMP
1.
Lock doors using keyfob.
2.
Check that security indicator lamp illuminates for 30 seconds.
Security indicator lamp should illuminate.
OK
>> GO TO 3.
NG
>> Perform diagnosis and repair. Refer to
3.
CHECK ALARM FUNCTION
1.
After 30 seconds, security indicator lamp will start to blink.
2.
Open any door or hood before unlocking with keyfob or open back door without keyfob.
Do alarm function properly.
OK
>> GO TO 4.
NG
>>
Check the following.
• The vehicle security system does not phase in alarm mode. Refer to
.
• Alarm do not operate. Refer to
.
4.
CHECK ALARM CANCEL OPERATION
Unlock any door or open back door using keyfob.
Alarm (horn and siren) should stop.
OK
>> INSPECTION END.
NG
>> Check door lock function. Refer to
![](/vehicle/qul/ene/roryboritele/oaru.png)
NATS (NISSAN ANTI-THEFT SYSTEM)
SEC-249
< ON-VEHICLE REPAIR >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
ON-VEHICLE REPAIR
NATS (NISSAN ANTI-THEFT SYSTEM)
Exploded View
INFOID:0000000001097892
SEC-249, "Removal and Installation"
NOTE:
An illustration is an object for Intelligent Key system.
Removal and Installation
INFOID:0000000001097893
REMOVAL
1.
Remove the steering column cover.
Refer to
IP-12, "Removal and Installation"
.
2.
Remove the NATS antenna amp. mounting screw (A), and then
remove NATS antenna amp. (1) from steering lock assembly (2).
NOTE:
An illustration is an object for Intelligent Key system.
INSTALLATION
Install in the reverse order of removal.
JMKIA0463ZZ
1.
NATS antenna amp.
2.
Steering lock assembly
JMKIA0464ZZ
![](/vehicle/qul/ene/roryboritele/dolan.png)
SEC-250
< ON-VEHICLE REPAIR >
[WITHOUT INTELLIGENT KEY SYSTEM]
SIREN
SIREN
Exploded View
INFOID:0000000001097894
SIREN
SEC-250, "Removal and Installation"
Removal and Installation
INFOID:0000000001097895
REMOVAL
1.
Remove the luggage side lower finisher (LH).
Refer to
INT-24, "Removal and Installation"
.
2.
Remove the siren mounting bolt (A), and then remove siren (1).
INSTALLATION
Install in the reverse order of removal.
JMKIA0461ZZ
1.
Siren
JMKIA0462ZZ
![](/vehicle/qul/ene/roryboritele/dra.png)
SIREN CONTROL UNIT
SEC-251
< ON-VEHICLE REPAIR >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
SIREN CONTROL UNIT
Exploded View
INFOID:0000000001097916
SIREN CONTROL UNIT
SEC-251, "Removal and Installation"
Removal and Installation
INFOID:0000000001097917
REMOVAL
1.
Remove the glove box.
Refer to
IP-12, "Removal and Installation"
.
2.
Remove the siren control unit mounting screw (A), and then
remove siren control unit (1).
INSTALLATION
Install in the reverse order of removal.
JMKIA0445ZZ
1.
Siren control unit
JMKIA0446ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст