Nissan Qashqai (2007-2010). Manual — part 1460
![](/vehicle/qul/ene/lirlel/preem.png)
DEF-16
< COMPONENT DIAGNOSIS >
REAR WINDOW DEFOGGER SWITCH
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace harness between heater control panel and ground.
5.
CHECK BCM OUTPUT SIGNAL
1.
Connect BCM connector.
2.
Turn ignition switch ON.
3.
Check voltage between BCM connector and ground.
Is the inspection result normal?
YES
>> Refer to
GI-39, "Intermittent Incident"
.
NO
>> GO TO 6.
6.
CHECK INTERMITTENT INCDENT
Check intermittent incident.
Refer to
GI-39, "Intermittent Incident"
Is the inspection result normal?
YES
>> Replace BCM. Refer to
NO
>> Repair or replace the malfunctioning parts.
WITHOUT AUTO A/C : Component Inspection
INFOID:0000000000997885
1.
CHECK HEATER CONTROL PANEL (REAR WINDOW DEFOGGER SWITCH)
Check heter control panel (rear window defogger switch).
Is the inspection result normal?
YES
>> INSPECTION END.
NO
>> Replace heter control panel (rear window defogger switch). Refer to
.
Heater control panel connector
Terminal
Ground
Continuity
M54
20
Existed
Connector
Terminal
Voltage (V)
(Approx.)
(+)
(–)
M65
21
Ground
JPMIA0154GB
Terminal
Condition
Continuity
Heater control panel
18
20
Rear window defogger switch is pressed
Existed
Rear window defogger switch: OFF
Not existed
![](/vehicle/qul/ene/lirlel/deat.png)
REAR WINDOW DEFOGGER POWER SUPPLY AND GROUND CIRCUIT
DEF-17
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
DEF
N
O
P
REAR WINDOW DEFOGGER POWER SUPPLY AND GROUND CIRCUIT
Description
INFOID:0000000000951272
Heats the heating wire with the power supply from the rear window defogger relay to prevent the rear window
from fogging up.
Component Function Check
INFOID:0000000000951273
1.
CHECK REAR WINDOW DEFOGGER
Check that the heating wire of rear window defogger is heated when turning the rear window defogger switch
ON.
Is the inspection result normal?
YES
>> Rear window defogger is OK.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000000951274
1.
CHECK POWER SUPPLY CIRCUIT
1.
Turn ignition switch ON.
2.
Check voltage between rear window defogger connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> GO TO 3.
2.
CHECK GROUND CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect rear window defogger connector.
3.
Check continuity between rear window defogger connector and ground.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace harness between rear window defogger and ground.
3.
CHECK HARNESS CONTINUITY
1.
Turn ignition switch OFF.
2.
Disconnect IPDM E/R and rear window defogger connectors.
3.
Check continuity between IPDM E/R and rear window defogger connector.
4.
Check continuity between IPDM E/R connector and ground.
Terminals
Condition of rear window
defogger switch
Voltage (V)
(Approx.)
(+)
(–)
Rear window defogger
connector
Terminal
B58
1
Ground
ON
Battery voltage
OFF
0
Rear window defogger connector
Terminal
Ground
Continuity
D155
2
Existed
IPDM E/R connector
Terminal
Rear window defogger connector
Terminal
Continuity
E14
49
B58
1
Existed
IPDM E/R connector
Terminal
Ground
Continuity
E14
49
Not existed
![](/vehicle/qul/ene/lirlel/ngooreveng.png)
DEF-18
< COMPONENT DIAGNOSIS >
REAR WINDOW DEFOGGER POWER SUPPLY AND GROUND CIRCUIT
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace harness between IPDM E/R and rear window defogger .
4.
CHECK FILAMENT
Check filament.
Refer to
DEF-18, "Component Inspection"
Is the inspection result normal?
YES
>> Refer to
GI-39, "Intermittent Incident"
.
NO
>> Repair filament.
5.
CHECK IPDM E/R OUTPUT SIGNAL
1.
Turn ignition switch ON.
2.
Check voltage between IPDM E/R connector and ground.
Is the inspection result normal?
YES
>> Refer to
GI-39, "Intermittent Incident"
.
NO
>> Replace IPDM E/R. Refer to
PCS-32, "Removal and Installation"
Component Inspection
INFOID:0000000000951275
1.
CHECK FILAMENT
Check the filament for damage or blown.
Refer to
DEF-75, "Inspection and Repair"
Is the inspection result normal?
YES
>> INSPECTION END.
NO
>> Repair filament.
Terminal
Condition
Voltage (V)
(Approx.)
(+)
(–)
49
Ground
Rear window defogger switch : ON
Battery voltage
Rear window defogger switch : OFF
0
![](/vehicle/qul/ene/lirlel/busimyawhein.png)
DRIVER SIDE DOOR MIRROR DEFOGGER
DEF-19
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
DEF
N
O
P
DRIVER SIDE DOOR MIRROR DEFOGGER
Description
INFOID:0000000000951276
Heats the heating wire with the power supply from the rear window defogger relay to prevent the door mirror
from fogging up.
Component Function Check
INFOID:0000000000951277
1.
CHECK DRIVER SIDE DOOR MIRROR DEFOGGER
Check that heating wire of driver side door mirror defogger is heated when turning the rear window defogger
switch ON.
Is the inspection result normal?
YES
>> Driver side door mirror defogger is OK.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000000951278
1.
CHECK POWER SUPPLY CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect door mirror (driver side) connector.
3.
Turn ignition switch ON.
4.
Check voltage between door mirror (driver side) connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> GO TO 3.
2.
CHECK GROUND CIRCUIT
1.
Turn ignition switch OFF.
2.
Check continuity between door mirror (driver side) connector and ground.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace harness between door mirror (driver side) and ground.
3.
CHECK DOOR MIRROR HARNESS CONTINUITY
1.
Turn ignition switch OFF.
2.
Disconnect IPDM E/R connector.
3.
Check continuity between door mirror (driver side) connector and IPDM E/R.
4.
Check continuity between door mirror (driver side) connector and ground.
Terminals
Condition of rear win-
dow defogger switch
Voltage (V)
(Approx.)
(+)
(–)
Door mirror (driver side) connector
Terminal
D3(LHD)
D23(RHD)
7
Ground
ON
Battery voltage
OFF
0
Door mirror (driver side) connector
Terminal
Ground
Continuity
D3(LHD)
D23(RHD)
8
Existed
Door mirror (driver side) connector
Terminal
IPDM E/R connector
Terminal
Continuity
D3(LHD)
D23(RHD)
7
E14
49
Existed
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст