Nissan Qashqai (2007-2010). Manual — part 1317
![](/vehicle/qul/ene/roryboritele/ddichamou.png)
MIR-14
< COMPONENT DIAGNOSIS >
DOOR MIRROR MOTOR
NO
>> Replace door mirror. Refer to
MIR-39, "Removal and Installation"
.
Component Inspection
INFOID:0000000000951523
1.
CHECK DOOR MIRROR MOTOR-I
Check that door mirror motor does not trap foreign objects and does not have any damage.
Refer to
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Replace door mirror. Refer to
MIR-39, "Removal and Installation"
.
2.
CHECK DOOR MIRROR MOTOR-II
1.
Turn ignition switch OFF.
2.
Disconnect door mirror connector.
3.
Apply 12V to each power supply terminal of door mirror motor.
Is the inspection result normal?
YES
>> INSPECTION END.
NO
>> Replace door mirror. Refer to
MIR-39, "Removal and Installation"
.
Door mirror connector
Terminal
Operational direction
(+)
(–)
LHD models
D3 (Driver side) / D43 (Passenger side)
RHD models
D23 (Driver side) / D63 (Passenger side)
4
2
RIGHT
2
4
LEFT
3
4
UP
4
3
DOWN
![](/vehicle/qul/ene/roryboritele/kelusste.png)
FOLDING MOTOR
MIR-15
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
FOLDING MOTOR
Description
INFOID:0000000000951528
Power is supplied to the door mirror when pressing on door mirror remote control switch (open/close switch)
and door mirror is operated.
Component Function Check
INFOID:0000000000951529
1.
CHECK FOLDING MOTOR FUNCTION
Check that door mirror operates when open/close switch is pressed.
Is the inspection result normal?
YES
>> Folding motor function is OK.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000000951530
1.
CHECK FOLDING MOTOR INPUT SIGNAL
1.
Turn ignition switch ON.
2.
Check voltage between door mirror connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> GO TO 2.
2.
CHECK HARNESS CONTINUITY
1.
Turn ignition switch OFF.
2.
Disconnect door mirror remote control switch connector and door mirror connector.
3.
Check continuity between door mirror remote control switch connector and door mirror connector.
4.
Check continuity between door mirror remote control switch connector and ground.
Is the inspection result normal?
YES
>> Refer to
GI-39, "Intermittent Incident"
.
NO
>> Repair or replace harness.
3.
CHECK FOLDING MOTOR
Check folding motor.
Refer to
MIR-16, "Component Inspection"
Is the inspection result normal?
YES
>> Refer to
GI-39, "Intermittent Incident"
.
(+)
(–)
Open / close switch condition
Voltage (V)
(Approx.)
Door mirror connector Terminal
LHD models
D3 (Driver side) / D43 (Passenger side)
RHD models
D23 (Driver side) / D63 (Passenger side)
5
Ground
CLOSE
Battery voltage
Other than above
0
6
OPEN
Battery voltage
Other than above
0
Door mirror remote control
switch connector
Terminal
Door mirror connector
Terminal
Continuity
M7
8
LHD models D3 (Driver side) / D43 (Passenger side)
RHD models D23 (Driver side) / D63 (Passenger side)
5
Existed
9
6
Door mirror remote control switch connector
Terminal
Ground
Continuity
M7
8
Not existed
9
![](/vehicle/qul/ene/roryboritele/gech.png)
MIR-16
< COMPONENT DIAGNOSIS >
FOLDING MOTOR
NO
>> Replace door mirror. Refer to
MIR-39, "Removal and Installation"
.
Component Inspection
INFOID:0000000000951531
1.
CHECK FOLDING MOTOR-I
Check that folding motor does not trap foreign objects and does not have any damage.
Refer to
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Replace door mirror. Refer to
MIR-39, "Removal and Installation"
.
2.
CHECK FOLDING MOTOR-II
1.
Turn ignition switch OFF.
2.
Disconnect door mirror connector.
3.
Apply 12V to each power supply terminal of door mirror motor.
Is the inspection result normal?
YES
>> INSPECTION END.
NO
>> Replace door mirror. Refer to
MIR-39, "Removal and Installation"
.
Door mirror connector
Terminal
Open/close switch condition
(+)
(–)
LHD models D3 (Driver side) / D43 (Passenger side)
RHD models D23 (Driver side) / D63 (Passenger side)
5
6
CLOSE
6
5
OPEN
![](/vehicle/qul/ene/roryboritele/forintefesec.png)
AUTO ANTI-DAZZLING INSIDE MIRROR CIRCUIT
MIR-17
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
AUTO ANTI-DAZZLING INSIDE MIRROR CIRCUIT
Description
INFOID:0000000000951532
It automatically changes according to the brightness of the light that is reflected from the headlight of the vehi-
cle at the rear.
Component Function Check
INFOID:0000000000951533
1.
CHECK AUTO ANTI-DAZZLING INSIDE MIRROR FUNCTION
Check that auto anti-dazzling inside mirror can operate when mirror sensor is illuminated.
Is the inspection result normal?
YES
>> Auto anti-dazzling inside mirror function is OK.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000000951534
1.
CHECK POWER SUPPLY CIRCUIT
Check voltage between auto anti-dazzling inside mirror connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness.
2.
CHECK GROUND CIRCUIT
1.
Disconnect auto anti-dazzling inside mirror connector.
2.
Check continuity between auto anti-dazzling inside mirror connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness.
3.
CHECK INTERMITTENT INCIDENT
Check intermittent incident.
Refer to
GI-39, "Intermittent Incident"
.
Is the inspection result normal?
YES
>> Replace auto anti-dazzling inside mirror. Refer to
MIR-37, "Removal and Installation"
.
NO
>> Repair or replace the malfunctioning parts.
(+)
(-)
Condition of ignition switch
Voltage (V)
(Approx.)
Auto anti-dazzling inside mirror
connector
Terminal
Ground
R6
1
ACC or ON
Battery voltage
Auto anti-dazzling inside mirror connector
Terminal
Ground
Continuity
R6
2
Existed
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст