Nissan Qashqai (2007-2010). Manual — part 1323
![](/vehicle/qul/ene/roryboritele/che.png)
MIR-38
< ON-VEHICLE REPAIR >
DOOR MIRROR
DOOR MIRROR
Exploded View
INFOID:0000000001093102
REMOVAL
DISASSEMBLY
1.
Door mirror assembly
2.
Corner cover
:Clip
JMLIA0035ZZ
![](/vehicle/qul/ene/roryboritele/ght.png)
DOOR MIRROR
MIR-39
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
Removal and Installation
INFOID:0000000001093103
REMOVAL
1.
Remove the front door finisher. Refer to
INT-10, "FRONT DOOR FINISHER : Removal and Installation"
.
2.
Remove the corner cover.
3.
Disconnect the door mirror harness connector.
4.
Remove the door mirror mounting nuts, and remove the door mirror assembly.
CAUTION:
Do not damage the mirror bodies.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Do not damage the mirror bodies.
Disassembly and Assembly
INFOID:0000000001093104
DISASSEMBLY
1.
Remove the clips and mirror cover from the housing.
2.
Place the mirror body with mirror glass upward.
1.
Mirror (mirror holder)
2.
Mirror assembly
3.
Mirror cover
Pawl
JMLIA0036ZZ
![](/vehicle/qul/ene/roryboritele/veshesukig.png)
MIR-40
< ON-VEHICLE REPAIR >
DOOR MIRROR
3.
Put a strip of protective tape (B) on mirror body.
4.
Insert a small flatted driver (A) between the mirror assembly and the mirror glass, and remove the pawl
located under the mirror glass from mirror assembly.
NOTE:
when removing the pawl under the mirror glass, the left and right side pawls are simultaneously removed.
5.
From the mirror assembly side, hold and push the mirror glass
downward.
CAUTION:
Avoid dropping the mirror glass by holding it securely.
6.
Slide the mirror glass upward as shown by the arrow and
remove it from the mirror assembly.
7.
Remove two terminals of mirror heater attachment.
ASSEMBLY
Install in the reverse order of removal.
NOTE:
After installation, visually check that pawls are securely engaged.
:Pawl
JMLIA0038ZZ
JMLIA0039ZZ
JMLIA0040ZZ
![](/vehicle/qul/ene/roryboritele/ntowa.png)
DOOR MIRROR REMOTE CONTROL SWITCH
MIR-41
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
DOOR MIRROR REMOTE CONTROL SWITCH
Exploded View
INFOID:0000000000951550
Removal and Installation
INFOID:0000000000951551
REMOVAL
1.
Remove the mirror switch finisher (2).
Refer to
IP-12, "Removal and Installation"
2.
Remove door mirror remote control switch (1) from mirror switch
finisher (2) using screw driver (A).
INSTALLATION
Install in the reverse order of removal.
JMLIA0028ZZ
1.
Door mirror remote control switch
2.
Mirror switch finsher
: Pawl
JMLIA0029ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст