Nissan Qashqai (2007-2010). Manual — part 1363

EXTERIOR LIGHTING SYSTEM SYMPTOMS

EXL-157

< SYMPTOM DIAGNOSIS >

[XENON TYPE]

C

D

E

F

G

H

I

J

K

M

A

B

EXL

N

O

P

Front fog lamp indicator lamp is not turned ON.
(Front fog lamp is turned ON.)

Combination meter

• Combination meter

Data monitor "FR FOG IND"

• BCM (HEAD LAMP)

Active test "FR FOG LAMP"

Parking lamp is not turned ON.

• Parking lamp bulb
• Harness between IPDM E/R

and the front combination lamp

• Front combination lamp
• IPDM E/R

Parking lamp circuit
Refer to

EXL-64

.

Tail lamp is not turned ON.

• Tail lamp bulb
• Harness between IPDM E/R

and the rear combination lamp

• Rear combination lamp

Tail lamp circuit
Refer to

EXL-74

.

License plate lamp is not turned ON.

• License plate lamp bulb
• Harness between IPDM E/R

and the license plate lamp

• License plate lamp

License plate lamp circuit
Refer to

EXL-76

.

Tail lamp and the license plate lamp are not turned
ON.

• Fuse
• Harness between IPDM E/R

and the rear combination lamp

• IPDM E/R

Tail lamp circuit
Refer to

EXL-74

.

• Parking lamp, the tail lamp and the license plate

lamp are not turned ON.

• Parking lamp, the tail lamp and the license plate

lamp are not turned OFF.

(Each illumination is turned ON/OFF.)

Symptom diagnosis
"PARKING, LICENSE PLATE AND TAIL LAMPS ARE NOT TURNED
ON"
Refer to

EXL-162

.

Tail lamp indicator is not turned ON.
(Parking/tail lamps are turned ON.)

Combination meter

• Combination meter

Data monitor "LIGHT IND"

• BCM (HEAD LAMP)

Active test "TAIL LAMP"

Turn signal lamp does not
blink.

Indicator lamp is nor-
mal.
(Applicable side per-
forms the high flasher
activation.)

• Harness between BCM and

each turn signal lamp

• Turn signal lamp bulb

Turn signal circuit
Refer to

EXL-66

.

Indicator lamp is includ-
ed.

• Combination switch
• Harness between the combina-

tion switch and BCM

• BCM

Combination switch
Refer to

BCS-63

.

Turn signal indicator lamp
does not blink.
(Turn signal indicator
lamp is normal.)

One side

Combination meter

—

Both sides
(Always)

• Turn signal indicator lamp sig-

nal

- BCM
• Combination meter

• Combination meter

Data monitor "TURN IND"

• BCM (FLASHER)

Active test "FLASHER"

Both sides
(Only when activating
hazard warning lamp
with the ignition switch
OFF)

• Combination meter power sup-

ply and the ground circuit

• Combination meter

Combination meter
Power supply and the ground circuit
Refer to

MWI-28

.

• Hazard warning lamp does not activate.
• Hazard warning lamp continues activating.
(Turn signal is normal.)

• Hazard switch
• Harness between the hazard

switch and BCM

• BCM

Hazard switch
Refer to

EXL-72

.

Symptom

Possible cause

Inspection item

EXL-158

< SYMPTOM DIAGNOSIS >

[XENON TYPE]

EXTERIOR LIGHTING SYSTEM SYMPTOMS

Rear fog lamp is not
turned ON.

Rear fog lamp indicator
lamp is normal.

• Harness between BCM and

rear fog lamp

• Rear fog lamp bulb
• BCM

Rear fog lamp circuit
Refer to

EXL-77

.

Rear fog lamp indicator
lamp is included.

• Combination switch
• Harness between combination

switch and BCM

• BCM

Combination switch
Refer to

BCS-63

.

Rear fog lamp indicator lamp does not turn on.
(Rear fog lamp turns ON)

• Rear fog lamp status signal
- BCM
• Combination meter

• Combination meter

Data monitor "REAR FOG IND"

• BCM (HEAD LAMP)

Active test "RR FOG LAMP"

Headlamp auto aiming does not activate.

• Harness between auto levelizer

control unit and aiming motor.

• Front combination lamp

(Aiming motor)

• Auto levelizer control unit

Aiming motor
Refer to

EXL-59

.

Symptom

Possible cause

Inspection item

NORMAL OPERATING CONDITION

EXL-159

< SYMPTOM DIAGNOSIS >

[XENON TYPE]

C

D

E

F

G

H

I

J

K

M

A

B

EXL

N

O

P

NORMAL OPERATING CONDITION

Description

INFOID:0000000000955493

XENON HEADLAMP

• Brightness and the color of light may change slightly immediately after turning the headlamp ON until the

xenon bulb becomes stable. This is normal.

• Illumination time lag may occur between right and left. This is normal.

AUTO LIGHT SYSTEM

The headlamp may not be turned ON/OFF immediately after passing dark area or bright area (short tunnel,
sky bridge, shadowed area etc.) while using the auto light system. This causes the control difference. This is
normal.

EXL-160

< SYMPTOM DIAGNOSIS >

[XENON TYPE]

BOTH SIDE HEADLAMPS (HI) ARE NOT TURNED ON

BOTH SIDE HEADLAMPS (HI) ARE NOT TURNED ON

Description

INFOID:0000000000955494

Both side headlamps (HI) are not turned ON when setting to the lighting switch HI or PASS.

Diagnosis Procedure

INFOID:0000000000955495

1.

COMBINATION SWITCH INSPECTION

Check the combination switch. Refer to

BCS-63, "Symptom Table"

.

Is the combination switch normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning part.

2.

CHECK HEADLAMP (HI) REQUEST SIGNAL INPUT

CONSULT-III DATA MONITOR

1.

Select "HL HI REQ" of IPDM E/R data monitor item.

2.

With operating the lighting switch, check the monitor status.

Is the item status normal?

YES

>> GO TO 3.

NO

>> Replace BCM. Refer to

BCS-64, "Exploded View"

.

3.

HEADLAMP (HI) CIRCUIT INSPECTION

Check the headlamp (HI) circuit. Refer to

EXL-52, "Component Function Check"

.

Is the headlamp (HI) circuit normal?

YES

>> Replace IPDM E/R.

NO

>> Repair or replace the malfunctioning part.

Monitor item

Condition

Monitor status

HL HI REQ

Lighting switch
(2ND)

HI or PASS

ON

LO

OFF