Nissan Qashqai (2007-2010). Manual — part 1402

EXTERIOR LIGHTING SYSTEM SYMPTOMS

EXL-313

< SYMPTOM DIAGNOSIS >

[HALOGEN TYPE]

C

D

E

F

G

H

I

J

K

M

A

B

EXL

N

O

P

Rear fog lamp is not
turned ON.

Rear fog lamp indicator
lamp is normal.

• Harness between BCM and

rear fog lamp

• Rear fog lamp bulb
• BCM

Rear fog lamp circuit
Refer to

EXL-236

.

Rear fog lamp indicator
lamp is included.

• Combination switch
• Harness between combination

switch and BCM

• BCM

Combination switch
Refer to

BCS-63

.

Rear fog lamp indicator lamp does not turn on.
(Rear fog lamp turns ON)

• Rear fog lamp status signal
- BCM
• Combination meter

• Combination meter

Data monitor "REAR FOG IND"

• BCM (HEAD LAMP)

Active test "RR FOG LAMP"

Symptom

Possible cause

Inspection item

EXL-314

< SYMPTOM DIAGNOSIS >

[HALOGEN TYPE]

NORMAL OPERATING CONDITION

NORMAL OPERATING CONDITION

Description

INFOID:0000000001026263

AUTO LIGHT SYSTEM

The headlamp may not be turned ON/OFF immediately after passing dark area or bright area (short tunnel,
sky bridge, shadowed area etc.) while using the auto light system. This causes the control difference. This is
normal.

BOTH SIDE HEADLAMPS (HI) ARE NOT TURNED ON

EXL-315

< SYMPTOM DIAGNOSIS >

[HALOGEN TYPE]

C

D

E

F

G

H

I

J

K

M

A

B

EXL

N

O

P

BOTH SIDE HEADLAMPS (HI) ARE NOT TURNED ON

Description

INFOID:0000000001099384

Both side headlamps (HI) are not turned ON when setting to the lighting switch HI or PASS.

Diagnosis Procedure

INFOID:0000000001099385

1.

COMBINATION SWITCH INSPECTION

Check the combination switch. Refer to

BCS-63, "Symptom Table"

.

Is the combination switch normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning part.

2.

CHECK HEADLAMP (HI) REQUEST SIGNAL INPUT

CONSULT-III DATA MONITOR

1.

Select "HL HI REQ" of IPDM E/R data monitor item.

2.

With operating the lighting switch, check the monitor status.

Is the item status normal?

YES

>> GO TO 3.

NO

>> Replace BCM. Refer to

BCS-64, "Exploded View"

.

3.

HEADLAMP (HI) CIRCUIT INSPECTION

Check the headlamp (HI) circuit. Refer to

EXL-216, "Component Function Check"

.

Is the headlamp (HI) circuit normal?

YES

>> Replace IPDM E/R.

NO

>> Repair or replace the malfunctioning part.

Monitor item

Condition

Monitor status

HL HI REQ

Lighting switch
(2ND)

HI or PASS

ON

LO

OFF

EXL-316

< SYMPTOM DIAGNOSIS >

[HALOGEN TYPE]

BOTH SIDE HEADLAMPS (LO) ARE NOT TURNED ON

BOTH SIDE HEADLAMPS (LO) ARE NOT TURNED ON

Description

INFOID:0000000001099386

Both side headlamps (LO) are not turned ON in any condition.

Diagnosis Procedure

INFOID:0000000001099387

1.

CHECK COMBINATION SWITCH

Check the combination switch. Refer to

BCS-63, "Symptom Table"

.

Is the combination switch normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning part.

2.

CHECK HEADLAMP (LO) REQUEST SIGNAL INPUT

CONSULT-III DATA MONITOR

1.

Select "HL LO REQ" of IPDM E/R data monitor item.

2.

With operating the lighting switch, check the monitor status.

Is the item status normal?

YES

>> GO TO 3.

NO

>> Replace BCM. Refer to

BCS-64, "Exploded View"

.

3.

HEADLAMP (LO) CIRCUIT INSPECTION

Check the headlamp (LO) circuit. Refer to

EXL-218, "Component Function Check"

.

Is the headlamp (LO) circuit normal?

YES

>> Replace IPDM E/R.

NO

>> Repair or replace the malfunctioning part.

Monitor item

Condition

Monitor status

HL LO REQ

Lighting switch

2ND

ON

OFF

OFF