Nissan Qashqai (2007-2010). Manual — part 375
AUTOMATIC SPEED CONTROL DEVICE (ASCD)
EC-1019
< FUNCTION DIAGNOSIS >
[MR20DE (WITHOUT EURO-OBD)]
C
D
E
F
G
H
I
J
K
L
M
A
EC
N
P
O
When any of following conditions exist, cruise operation will be canceled.
• CANCEL switch is pressed
• More than 2 switches at ASCD steering switch are pressed at the same time (Set speed will be cleared)
• Brake pedal is depressed
• Clutch pedal is depressed or gear position is changed to neutral position. (M/T models)
• Selector lever is changed to N, P, R position (CVT models)
• Vehicle speed decreased to 13 km/h (8 MPH) lower than the set speed
• TCS system is operated
When the ECM detects any of the following conditions, the ECM will cancel the cruise operation and inform
the driver by blinking indicator lamp.
• Engine coolant temperature is slightly higher than the normal operating temperature, CRUISE lamp may
blink slowly.
When the engine coolant temperature decreases to the normal operating temperature, CRUISE lamp will
stop blinking and the cruise operation will be able to work by pressing SET/COAST switch or RESUME/
ACCELERATE switch.
• Malfunction for some self-diagnoses regarding ASCD control: SET lamp will blink quickly.
If MAIN switch is turned to OFF during ASCD is activated, all of ASCD operations will be canceled and vehicle
speed memory will be erased.
COAST OPERATION
When the SET/COAST switch is pressed during cruise control driving, decrease vehicle set speed until the
switch is released. And then ASCD will keep the new set speed.
RESUME OPERATION
When the RESUME/ACCELERATE switch is pressed after cancel operation other than pressing MAIN switch
is performed, vehicle speed will return to last set speed. To resume vehicle set speed, vehicle condition must
meet following conditions.
• Brake pedal is released
• Clutch pedal is released (M/T models)
• Selector lever is in other than P and N positions (CVT models)
• Vehicle speed is greater than 40 km/h (25 MPH) and less than 180 km/h (112 MPH)
Component Parts Location
INFOID:0000000001115786
EC-1020
< FUNCTION DIAGNOSIS >
[MR20DE (WITHOUT EURO-OBD)]
AUTOMATIC SPEED CONTROL DEVICE (ASCD)
1.
Ignition coil (with power transistor)
and spark plug
2.
PCV valve
3.
Refrigerant pressure sensor
4.
Fuel injector
5.
Knock sensor
6.
Cooling fan motor
7.
Camshaft position sensor (PHASE)
8.
Engine coolant temperature sensor
9.
IPDM E/R
10. ECM
11.
Mass air flow sensor (with intake
temperature sensor)
12. Electric throttle control actuator
(with built in throttle position sensor
and throttle control motor)
13. EVAP canister purge volume control
solenoid valve
1.
ECM
2.
IPDM E/R
3.
Fuel pump fuse (15A)
JMBIA0338ZZ
JMBIA0340ZZ
AUTOMATIC SPEED CONTROL DEVICE (ASCD)
EC-1021
< FUNCTION DIAGNOSIS >
[MR20DE (WITHOUT EURO-OBD)]
C
D
E
F
G
H
I
J
K
L
M
A
EC
N
P
O
1.
Electric throttle control actuator
(with built-in position sensor, throttle
control motor)
2.
Throttle valve
1.
EVAP canister purge volume control
solenoid valve
2.
Mass air flow sensor
(with intake air temperature sensor)
1.
Camshaft position sensor
2.
Engine coolant temperature sensor
JMBIA0341ZZ
JMBIA0342ZZ
JMBIA0343ZZ
EC-1022
< FUNCTION DIAGNOSIS >
[MR20DE (WITHOUT EURO-OBD)]
AUTOMATIC SPEED CONTROL DEVICE (ASCD)
PBIB2942E
1.
Heated oxygen sensor 1 harness
connector
2.
Heated oxygen sensor 1
3.
Heated oxygen sensor 2
4.
Heated oxygen sensor 2 harness
connector
1.
PCV valve
2.
Ignition coil (with power transistor)
and spark plug
3.
Fuel injection
JMBIA0454ZZ
JMBIA0344ZZ
JMBIA0345ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст