Subaru Impreza 3 / Impreza WRX / Impreza WRX STI. Service manual — part 610
AB-7
General Description
AIRBAG SYSTEM
• Do not disassemble driver’s airbag module, pas-
senger’s airbag module, side or curtain airbag
modules, or pretensioner.
• When attaching the steering wheel and steering
roll connector, be sure to adjust the steering roll
connector.
• The removed front seat with airbag module must
be kept at least 200 mm (8 in) away from walls and
other objects.
• When storing a removed airbag module, do not
place it with the pad side facing downward. Do not
place any objects on the airbag module. Do not pile
up the airbag module. If the pad of the airbag mod-
ule is in contact with other objects, it may cause a
serious accident if the airbag accidentally operates.
• Driver’s airbag module
• Passenger’s airbag module and side airbag
module
C: PREPARATION TOOL
1. GENERAL TOOL
(1) 200 mm (8 in) or more
AB-01541
NG
NG
NG
G
G
N
N
N
N
N
N
N
NG
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
N
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
N
N
N
N
N
N
N
N
N
N
N
NG
G
G
G
G
G
G
G
NG
G
G
G
NG
NG
NG
AB-00128
(1)
TOOL NAME
REMARKS
TORX
®
T30
Used for removal/installation of driv-
ers airbag module
AB-02148
NG
NG
NG
NGGGGGGGGGG
G
G
NN
N
NNNNNNNNNNNNGGGGGGGG
G
GGGGGGGGGGGGGGGGGGGG
NNNNNNNNG
NG
OK
OK
O
O
O
O
O
O
O
O
O
O
O
O
O
OK
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
AB-02149
NG
N
N
NN
OK
O
AB-8
Airbag Connector
AIRBAG SYSTEM
2. Airbag Connector
A: PROCEDURE
1. POWER SUPPLY
1) How to disconnect:
CAUTION:
When pulling the slide lock or disconnecting
connector, be sure to hold the connector, not
the harness.
Press the lock (A), and then disconnect the con-
nector.
2) How to connect:
CAUTION:
Be sure to insert the connector in until it is
locked. Then pull it gently to make sure that it is
locked.
Holding the connector, push it in securely until a
clicking sound is heard.
2. AIRBAG CONTROL MODULE
1) How to disconnect:
CAUTION:
When disconnecting connector, be sure to hold
the connector, not the harness.
Press the lock lever plate (A) and pull out the lock
lever.
2) How to connect:
CAUTION:
Be sure to insert the connector in until it is
locked. Then pull it gently to make sure that it is
locked.
Insert the connector and push the lock lever in se-
curely.
3. DRIVER’S AIRBAG MODULE (BETWEEN
AIRBAG MAIN HARNESS AND ROLL CON-
NECTOR) AND PASSENGER’S AIRBAG
MODULE
1) How to disconnect:
CAUTION:
When pulling the slide lock or disconnecting
connector, be sure to hold the connector, not
the harness.
(1) Push the slide lock (A) in the direction of ar-
row.
AB-01637
(A)
AB-01638
AB-01751
(A)
AB-00722
(A)
AB-9
Airbag Connector
AIRBAG SYSTEM
(2) With the slide lock pushed, disconnect the
connector.
2) How to connect:
CAUTION:
Be sure to insert the connector in until it is
locked. Then pull it gently to make sure that it is
locked.
Holding the connector, push it in securely until a
clicking sound is heard.
4. DRIVER’S AIRBAG MODULE, CURTAIN
AIRBAG MODULE AND PRETENSIONER
1) How to disconnect:
(1) Using a flat tip screwdriver, pry the push
lock upward to unlock.
(2) Pull the connector to disconnect from the
driver’s airbag module assembly or the retractor
assembly.
2) How to connect:
CAUTION:
• Be sure to insert the connector in until it is
locked.
• Press in the push lock securely. Then pull it
gently to make sure that it is locked.
Connect the connector in the reverse order of dis-
connecting. At this time, be sure to insert until a
clicking sound is heard.
5. SIDE AIRBAG SENSOR AND CURTAIN
AIRBAG SENSOR
1) How to disconnect:
CAUTION:
When pulling the slide lock or disconnecting
connector, be sure to hold the connector, not
the harness.
(1) Push the lock arm.
(2) Holding outer part, pull it one step in the di-
rection of arrow.
AB-00022
AB-00023
AB-00478
AB-00479
AB-00480
AB-02605
(2)
(1)
AB-10
Airbag Connector
AIRBAG SYSTEM
(3) Push the lock arm again.
(4) Holding outer part, pull it in the direction of
arrow to disconnect the connector.
2) How to connect:
CAUTION:
Be sure to insert the connector in until it is
locked. Then pull it gently to make sure that it is
locked.
Holding the connector, push it in securely until a
clicking sound is heard.
6. SATELLITE SAFING SENSOR
1) How to disconnect:
CAUTION:
When pulling the slide lock or disconnecting
connector, be sure to hold the connector, not
the harness.
Holding outer part (A), pull it in the direction of ar-
row.
2) How to connect:
CAUTION:
• Outer side (A) moves back, and so do not
touch the outer part.
• Be sure to insert the connector in until it is
locked. Then pull it gently to make sure that it is
locked.
Holding the connector, push it in securely until a
clicking sound is heard.
7. SIDE AIRBAG MODULE
1) How to disconnect:
CAUTION:
When pulling the slide lock or disconnecting
connector, be sure to hold the connector, not
the harness.
(1) Move the slide lock (A) in the direction of ar-
row and hold it.
(2) While holding the slide lock (A), pull the con-
nector (B) in the direction of arrow.
2) How to connect:
CAUTION:
Be sure to insert the connector in until it is
locked. Then pull it gently to make sure that it is
locked.
Holding the connector, push it in securely until a
clicking sound is heard.
AB-02606
(3)
(4)
AB-02607
AB-00024
AB-00025
AB-01830
(A)
(B)
AB-01829
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст