Subaru Legacy (2005 year). Service manual — part 14
NT-3
NOTE
Note
(1)
Supporting locations
(3)
Swing arm lift
(5)
Plate lift
(2)
Pantograph jack
(4)
Rigid rack
(6)
Attachment
NT-00086
a
a
b
(1)
(2)
(3)
(4)
(5)
(6)
(6)
(6)
(6)
NT-4
Vehicle-id:
SIE-id:Sa03676a15:A:NOTE
∼
NOTE
Note
8. TIE DOWNS
Tie downs are used when transporting vehicles and when using the chassis dynamo. Attach tie-down only to
the specified locations on the vehicle.
• TIE-DOWN LOCATION
(A)
Front
(B)
Rear
(1)
Front crossmember
(2)
Rear differential
(1)
Hook for tie-down
NT-00072
(1)
(2)
(A)
(B)
NT-00073
(1)
(1)
(1)
NT-5
NOTE
Note
• CHAIN DIRECTION AT TIE-DOWN CONDI-
TION
NOTE:
Pull the chains LH and RH in the same direction,
but front and rear side in the counter direction. Pull
all the chains in a same moment.
• CHAIN PULLING RANGE AT TIE-DOWN CON-
DITION
• VEHICLE SINKING VOLUME AT TIE-DOWN
CONDITION
Measure the distance between the highest tire
point and highest arch point before and after tie-
down. Difference of measurement value (sinking
volume) shall be within 50 mm (1.97 in) and make
sure to fix the vehicle securely.
(1) Chain pulling range at tie-down condition
(2) 20
°
(3) 45
°
NT-00117
NT-00122
(2)
(2)
(2)
(2)
(3)
(3)
(3)
(3)
: (1)
(2)
(2)
NT-00076
L
L
NT-6
Vehicle-id:
SIE-id:Sa03676a15:A:NOTE
∼
NOTE
Note
9. TOWING
Avoid towing vehicles except when the vehicle cannot be driven. For models with AWD, AT or VTD, use a
loader instead of towing. When towing other vehicles, pay attention to the following to prevent hook or vehicle
damage resulting from excessive weight.
• Do not tow other vehicles with a front tie-down hook.
• Make sure the towing vehicle is heavier than the towed vehicle.
• FRONT
Remove the fog light cover (except for OUTBACK model) and hook cover, and then install the hook.
• REAR
(A)
Fog light cover (except for OUT-
BACK model)
(B)
Hook cover
(C)
Hook
NT-00087
(B)
(C)
(A)
(B)
(C)
(A)
(C)
NT-00078
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст