Subaru Legacy (2005 year). Service manual — part 366
FU(H6DO)-17
FUEL INJECTION (FUEL SYSTEMS)
Intake Manifold
4) Install the manifold absolute pressure sensor.
<Ref. to FU(H6DO)-23, INSTALLATION, Manifold
Absolute Pressure Sensor.>
5) Connect the pressure regulator vacuum hose to
intake manifold.
6) Install the EGR valve. <Ref. to FU(H6DO)-25,
INSTALLATION, EGR Valve.>
7) Install the throttle body to intake manifold. <Ref.
to FU(H6DO)-11, INSTALLATION, Throttle Body.>
8) Install the engine harness to intake manifold.
E: INSPECTION
Make sure the fuel pipe and fuel hoses are not
damaged and the connections are tightened firmly.
FU-02123
FU(H6DO)-18
FUEL INJECTION (FUEL SYSTEMS)
Engine Coolant Temperature Sensor
4. Engine Coolant Temperature
Sensor
A: REMOVAL
1) Remove the collector cover.
2) Disconnect the ground cable from battery.
3) Disconnect the connectors from engine coolant
temperature sensor.
4) Remove the engine coolant temperature sensor.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
18 N
⋅
m (1.8 kgf-m, 13 ft-lb)
IN-00203
FU-00572
FU-00572
FU(H6DO)-19
FUEL INJECTION (FUEL SYSTEMS)
Crankshaft Position Sensor
5. Crankshaft Position Sensor
A: REMOVAL
1) Remove the collector cover.
2) Disconnect the ground cable from battery.
3) Remove the air intake chamber. <Ref. to
IN(H6DO)-7, REMOVAL, Air Intake Chamber.>
4) Remove the service hole cover.
5) Remove the crankshaft position sensor.
6) Disconnect the connector from crankshaft posi-
tion sensor.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
6.4 N
⋅
m (0.65 kgf-m, 4.7 ft-lb)
IN-00203
FU-02127
FU-02128
FU-02128
FU(H6DO)-20
FUEL INJECTION (FUEL SYSTEMS)
Camshaft Position Sensor
6. Camshaft Position Sensor
A: REMOVAL
1) Remove the collector cover.
2) Disconnect the ground cable from battery.
3) Remove the generator harness from fuel pipe
protector LH.
4) Remove the fuel pipe protector LH.
5) Disconnect the connector from camshaft posi-
tion sensor LH.
6) Remove the camshaft position sensor LH.
7) Remove the camshaft position sensor RH in the
same procedure as LH.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
Camshaft position sensor
6.4 N
⋅
m (0.65 kgf-m, 4.7 ft-lb)
Fuel pipe protector
19 N
⋅
m (1.9 kgf-m, 14 ft-lb)
IN-00203
FU-02117
FU-02129
FU-02130
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст