Subaru Legacy (2005 year). Service manual — part 378
EC(H6DO)-7
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
Purge Control Solenoid Valve
6. Purge Control Solenoid Valve
A: REMOVAL
1) Remove the collector cover.
2) Disconnect the ground cable from battery.
3) Remove the air intake chamber. <Ref. to
IN(H6DO)-7, REMOVAL, Air Intake Chamber.>
4) Disconnect the connector and hoses of purge
control solenoid valve, and then remove the purge
control solenoid valve.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
19 N
⋅
m (1.9 kgf-m, 14.0 ft-lb)
NOTE:
Connect the evaporation hose as shown in the fig-
ure.
C: INSPECTION
Make sure the hoses are not cracked or loose.
IN-00203
EC-02019
EC-02019
(A) To fuel pipe (Evaporation line)
(B) To intake manifold
EC-02020
(B)
(A)
EC(H6DO)-8
Vehicle-id:
SIE-id:S180707a18:A:REMOVAL
∼
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
Two-way Valve
7. Two-way Valve
A: REMOVAL
1) Lift-up the vehicle.
2) Disconnect the evaporation hoses from two-way
valve.
3) Remove the two-way valve as a unit with bracket
from body.
4) Remove the two-way valve from bracket.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
7.5 N
⋅
m (0.76 kgf-m, 5.5 ft-lb)
C: INSPECTION
Make sure the hoses are not cracked or loose.
EC-00221
EC(H6DO)-9
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
PCV Valve
8. PCV Valve
A: REMOVAL
1) Disconnect the PCV hose.
2) Remove the PCV valve from rocker cover.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Apply liquid gasket to the bolt threads of PCV
valve.
Liquid gasket:
THREE BOND 1105 (Part No. 004403010)
Tightening torque:
25 N
⋅
m (2.5 kgf-m, 18 ft-lb)
EC-02021
EC-02022
EC(H6DO)-10
Vehicle-id:
SIE-id:S180976a11:B:INSTALLATION
∼
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
PCV Valve
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст