Subaru Legacy (2005 year). Service manual — part 985
SR-15
SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)
Sunroof Switch
2. WAGON MODEL
Measure the sunroof switch resistance.
NOTE:
If glass lid does not operate or is not supplied with
power, move the glass lid using the emergency
handle (hex wrench). <Ref. to SR-7, FORCED
DRIVE, Glass Lid.>
Switch position
Terminal No.
Standard
Open
1 and 3
Less than 1
Ω
Close
3 and 4
Less than 1
Ω
SR-00041
R128
3
4
5
1
2
SR-16
SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)
Sunshade
7. Sunshade
A: REMOVAL
1. SEDAN MODEL
1) Remove the glass lid. <Ref. to SR-6, SEDAN
MODEL, REMOVAL, Glass Lid.>
2) Loosen the TORX
®
bolts, and remove sunshade
bracket (front).
3) Pull out the sunshade until sunshade bracket
(rear) is shown, loosen the TORX
®
bolts, and re-
move sunshade.
2. WAGON MODEL
1) Remove the frame assembly.
2) Remove the shade stopper (A) of sunshade.
3) Pull out the sunshade (A) from sunroof frame.
B: INSTALLATION
Install in the reverse order of removal.
SR-00122
SR-00123
SR-00093
(A)
SR-00086
(A)
SR-17
SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)
Sunshade
C: INSPECTION
1. CHECK FOR MOVING LOAD OF SUN-
SHADE
1) Attach a spring balance to sunshade edge using
a cloth.
2) Pull the spring balance to measure moving load
of the sunshade.
Moving load of sunshade:
Specification
18.0
±
5.0 N (1.8
±
0.5 kgf, 13
±
3.7 lbf)
NOTE:
Moving load is larger at the beginning of pulling a
spring balance, so take a spring balance reading
while sunshade sliding smoothly.
3) If moving load exceeds specifications, check the
glass lid, sunshade and frame assembly for im-
proper installation.
SR-00087
SR-18
SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)
Sunshade
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст