Subaru Legacy (2005 year). Service manual — part 51
EC(H4SO 2.0)-7
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
Purge Control Solenoid Valve
6. Purge Control Solenoid Valve
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the connector and hoses of purge
control solenoid valve, and then remove the purge
control solenoid valve.
• 2.0 L model
• 2.5 L model
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
19 N
⋅
m (1.9 kgf-m, 14 ft-lb)
• 2.0 L model
• 2.5 L model
NOTE:
Connect the evaporation hose as shown in the fol-
lowing figure.
• 2.0 L model
IN-00203
EC-02015
EC-00223
(A) To fuel pipe (Evaporation line)
(B) To intake manifold
EC-02015
EC-00223
EC-02016
(B)
(A)
EC(H4SO 2.0)-8
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
Purge Control Solenoid Valve
• 2.5 L model
C: INSPECTION
Make sure that the hoses are not cracked or loose.
(A) To fuel pipe (Evaporation line)
(B) To intake manifold
EC-00224
(B)
(A)
EC(H4SO 2.0)-9
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
Two-way Valve
7. Two-way Valve
A: REMOVAL
1) Lift-up the vehicle.
2) Disconnect the evaporation hoses from two-way
valve.
3) Remove the two-way valve as a unit with bracket
from body.
4) Remove the two-way valve from bracket.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
7.5 N
⋅
m (0.76 kgf-m, 5.5 ft-lb)
C: INSPECTION
Make sure that the hoses are not cracked or loose.
EC-00221
EC(H4SO 2.0)-10
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
PCV Valve
8. PCV Valve
A: REMOVAL
Disconnect the PCV hose and remove the PCV
valve.
• 2.0 L model
• 2.5 L EC, EK, EH, ER, K4 model
• 2.5 L KA, KS model
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Apply liquid gasket to the bolt threads of PCV
valve. (2.0 L model and 2.5 L KA, KS model)
Liquid gasket:
THREE BOND 1105 (Part No. 004403010)
Tightening torque:
23 N
⋅
m (2.3 kgf-m, 17 ft-lb)
EC-02029
EC-00225
EC-00228
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст