Subaru Legacy IV (2008 year). Service manual — part 601
GD(H6DO)-24
Diagnostic Trouble Code (DTC) Detecting Criteria
GENERAL DESCRIPTION
5. DIAGNOSTIC METHOD
• Abnormality Judgement
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
Time Needed for Diagnosis:8 ms × 320 time(s)
Malfunction Indicator Light Illumination: Illuminates when malfunction occurs in 2 continuous driving cy-
cles.
• Normality Judgement
Judge as OK and clear the NG if the continuous time while the following conditions are established is more
than the predetermined time.
Time Needed for Diagnosis: Less than 1 second
Judgement Value
Malfunction Criteria
Threshold Value
Output voltage level
Low
Rear oxygen sensor heater control duty
< 75 %
Judgement Value
Malfunction Criteria
Threshold Value
Output voltage level
High
GD(H6DO)-25
Diagnostic Trouble Code (DTC) Detecting Criteria
GENERAL DESCRIPTION
K: DTC P0038 HO2S HEATER CONTROL CIRCUIT HIGH (BANK 1 SENSOR 2)
1. OUTLINE OF DIAGNOSIS
Detect the rear oxygen sensor heater open or short circuit.
The rear oxygen sensor heater performs duty control, and the output terminal voltage at ON is 0 V, and the
output terminal voltage at OFF is the battery voltage.
Judge as NG when the terminal voltage remains High.
2. COMPONENT DESCRIPTION
3. ENABLE CONDITION
4. GENERAL DRIVING CYCLE
After starting the engine, perform the diagnosis continuously when engine is low speed.
(A)
Battery voltage
(C)
256 milliseconds (cycles)
(D)
High error
(B)
Output voltage of the rear oxygen
sensor heater
Secondary Parameters
Enable Conditions
Battery voltage
t 10.9 V
Elapsed time after engine starting
t 1 second
Engine speed
< 4500 rpm
EN-01793
(C)
(A)
(B)
ON
OFF
0V
(D)
GD(H6DO)-26
Diagnostic Trouble Code (DTC) Detecting Criteria
GENERAL DESCRIPTION
5. DIAGNOSTIC METHOD
• Abnormality Judgement
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
Time Needed for Diagnosis:8 ms × 320 time(s)
Malfunction Indicator Light Illumination: Illuminates when malfunction occurs in 2 continuous driving cy-
cles.
• Normality Judgement
Judge as OK and clear the NG if the continuous time while the following conditions are established is more
than the predetermined time.
Time Needed for Diagnosis: Less than 1 second
L: DTC P0050 HO2S HEATER CONTROL CIRCUIT (BANK 2 SENSOR 1)
1. OUTLINE OF DIAGNOSIS
NOTE:
For the detection standard, refer to DTC P0030. <Ref. to GD(H6DO)-17, DTC P0030 HO2S HEATER CON-
TROL CIRCUIT (BANK 1 SENSOR 1), Diagnostic Trouble Code (DTC) Detecting Criteria.>
M: DTC P0051 HO2S HEATER CONTROL CIRCUIT LOW (BANK 2 SENSOR 1)
1. OUTLINE OF DIAGNOSIS
NOTE:
For the detection standard, refer to DTC P0031. <Ref. to GD(H6DO)-19, DTC P0031 HO2S HEATER CON-
TROL CIRCUIT LOW (BANK 1 SENSOR 1), Diagnostic Trouble Code (DTC) Detecting Criteria.>
N: DTC P0052 HO2S HEATER CONTROL CIRCUIT HIGH (BANK 2 SENSOR 1)
1. OUTLINE OF DIAGNOSIS
NOTE:
For the detection standard, refer to DTC P0032. <Ref. to GD(H6DO)-21, DTC P0032 HO2S HEATER CON-
TROL CIRCUIT HIGH (BANK 1 SENSOR 1), Diagnostic Trouble Code (DTC) Detecting Criteria.>
O: DTC P0057 HO2S HEATER CONTROL CIRCUIT LOW (BANK 2 SENSOR 2)
1. OUTLINE OF DIAGNOSIS
NOTE:
For the detection standard, refer to DTC P0037. <Ref. to GD(H6DO)-23, DTC P0037 HO2S HEATER CON-
TROL CIRCUIT LOW (BANK 1 SENSOR 2), Diagnostic Trouble Code (DTC) Detecting Criteria.>
P: DTC P0058 HO2S HEATER CONTROL CIRCUIT HIGH (BANK 2 SENSOR 2)
1. OUTLINE OF DIAGNOSIS
NOTE:
For the detection standard, refer to DTC P0038. <Ref. to GD(H6DO)-25, DTC P0038 HO2S HEATER CON-
TROL CIRCUIT HIGH (BANK 1 SENSOR 2), Diagnostic Trouble Code (DTC) Detecting Criteria.>
Judgement Value
Malfunction Criteria
Threshold Value
Output voltage level
High
Rear oxygen sensor heater control duty
t 15 %
Judgement Value
Malfunction Criteria
Threshold Value
Output voltage level
Low
GD(H6DO)-27
Diagnostic Trouble Code (DTC) Detecting Criteria
GENERAL DESCRIPTION
Q: DTC P0068 MAP/MAF - THROTTLE POSITION CORRELATION
1. OUTLINE OF DIAGNOSIS
Detect problems in the intake manifold pressure sensor output properties.
Judge as NG when the intake air pressure AD value is Low whereas it seemed to be High from the viewpoint
of engine condition, or when it is High whereas it seemed to be Low from the engine condition.
2. COMPONENT DESCRIPTION
3. ENABLE CONDITION
4. GENERAL DRIVING CYCLE
Perform the diagnosis continuously after idling.
(A)
Output voltage
(B)
Absolute pressure
(1)
Connector
(2)
Terminals
(3)
O-ring
Secondary Parameters
Enable Conditions
Engine coolant temperature
t 75 °C (167 °F)
EN-01765
(B)
(A)
(2)
(3)
(1)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст