Subaru Legacy IV (2008 year). Service manual — part 851
WT-3
General Description
WHEEL AND TIRE SYSTEM
3. ADJUSTING PARTS
Wheel balancing
Standard:
Service limit
Dynamic unbalance
10 g (0.35 oz) or less
Balance weight part number
(Knock-on type weight for steel wheels)
Weight
28101AA001
5 g (0.18 oz)
28101AA011
10 g (0.35 oz)
28101AA021
15 g (0.53 oz)
28101AA031
20 g (0.71 oz)
28101AA041
25 g (0.88 oz)
28101AA051
30 g (1.06 oz)
28101AA061
35 g (1.23 oz)
28101AA071
40 g (1.41 oz)
28101AA081
45 g (1.59 oz)
28101AA091
50 g (1.76 oz)
28101AA101
55 g (1.94 oz)
28101AA111
60 g (2.12 oz)
Balance weight part number
(Knock-on type weight for aluminum wheel)
Weight
28101SA000
5 g (0.18 oz)
28101SA010
10 g (0.35 oz)
28101SA020
15 g (0.53 oz)
28101SA030
20 g (0.71 oz)
28101SA040
25 g (0.88 oz)
28101SA100
30 g (1.06 oz)
28101SA110
35 g (1.23 oz)
28101SA120
40 g (1.41 oz)
28101SA130
45 g (1.59 oz)
28101SA140
50 g (1.76 oz)
28101XA000
55 g (1.94 oz)
28101SA150
60 g (2.12 oz)
Balance weight part number
(Adhesive type weight for aluminum wheel)
Weight
28101AE00B
5 g (0.18 oz)
28101AE01B
7.5 g (0.26 oz)
28101AE02B
10 g (0.35 oz)
28101AE03B
12.5 g (0.44 oz)
28101AE04B
15 g (0.53 oz)
28101AE05B
17.5 g (0.62 oz)
28101AE06B
20 g (0.71 oz)
28101AE07B
22.5 g (0.79 oz)
28101AE08B
25 g (0.88 oz)
28101AE09B
27.5 g (0.97 oz)
28101AE10B
30 g (1.06 oz)
28101AE11B
32.5 g (1.15 oz)
28101AE12B
35 g (1.23 oz)
28101AE13B
37.5 g (1.32 oz)
28101AE14B
40 g (1.41 oz)
28101AE15B
42.5 g (1.50 oz)
28101AE16B
45 g (1.59 oz)
28101AE17B
47.5 g (1.68 oz)
28101AE18B
50 g (1.76 oz)
28101AE19B
52.5 g (1.85 oz)
28101AE20B
55 g (1.94 oz)
28101AE21B
57.5 g (2.03 oz)
28101AE22B
60 g (2.12 oz)
28101AE23B
62.5 g (2.20 oz)
28101AE24B
65 g (2.29 oz)
28101AE25B
67.5 g (2.38 oz)
28101AE26B
70 g (2.47 oz)
28101AE27B
72.5 g (2.56 oz)
28101AE28B
75 g (2.65 oz)
28101AE29B
77.5 g (2.73 oz)
28101AE30B
80 g (2.82 oz)
28101AE31B
82.5 g (2.91 oz)
28101AE32B
85 g (3.00 oz)
28101AE33B
87.5 g (3.09 oz)
28101AE34B
90 g (3.17 oz)
28101AE35B
92.5 g (3.26 oz)
28101AE36B
95 g (3.35 oz)
28101AE37B
97.5 g (3.44 oz)
28101AE38B
100 g (3.53 oz)
28101AG50B
102.5 g (3.62 oz)
28101AG51B
105 g (3.70 oz)
28101AG52B
107.5 g (3.79 oz)
28101AG53B
110 g (3.88 oz)
28101AG54B
112.5 g (3.97 oz)
28101AG55B
115 g (4.06 oz)
28101AG56B
117.5 g (4.14 oz)
28101AG57B
120 g (4.23 oz)
WT-4
General Description
WHEEL AND TIRE SYSTEM
B: COMPONENT
C: PREPARATION TOOL
1. GENERAL TOOL
(1)
Tire pressure monitoring control
module
(3)
Transmitter (Snap in type)
Tightening torque:N·m (kgf-m, ft-lb)
(4)
Valve
T1: 1.4 (0.14, 1)
(2)
Screw
T2: 7.5 (0.76, 5.5)
WT-00131
(1)
T2
(3)
(4)
T1
(2)
TOOL NAME
REMARKS
Air pressure gauge
Used for measuring tire air pressure.
Dial gauge with
magnet stand
Used for measuring wheel runout.
Wheel balancer
Used for adjusting wheel balance.
WT-5
Tire
WHEEL AND TIRE SYSTEM
2. Tire
A: INSPECTION
1) Take stones, glass, nails etc. out of the tread
groove.
2) Replace tires in the following cases.
CAUTION:
• When replacing a tire, make sure to use only
tires of the same size, construction and load
range as originally installed.
• Use a tire changer when removing the tire
from the wheel.
• On models equipped with tire pressure mon-
itoring systems, do not use the bead breaker in
a 90° area centered on the transmitter to pre-
vent damaging the transmitter.
• To prevent damaging the transmitter, set the
tire changer boom in the position as shown in
the figure.
(1) If large cracks on side wall, damage or
cracks on the tread is found.
(2) When the “tread wear indicator” appears as
a solid band across the tread.
3) When a crack on tire valve is found, replace the
tire valve.
1. TIRE ROTATION
Rotate tires periodically (12,500 km/7,500 miles) as
shown in the figure, in order to prevent them from
uneven wear and to prolong their life.
• Without instruction for the direction of tire rotation
• When the direction of tire rotation is specified
(1) Transmitter
(2) 90°
(use of a bead breaker is prohibited in this area.)
(1) Transmitter
(2) Direction of turn table rotation
(3) 90°
(4) Tire changer boom
(1)
WT-00070
(2)
(1)
WT-00071
(3)
(4)
(2)
(1) Tread wear indicator
(2) Tire tread
(1) Front
(1) Front
WT-00002
WT-00113
1
WT-00115
1
WT-6
Tire
WHEEL AND TIRE SYSTEM
NOTE:
Vehicles equipped with tire pressure monitoring
systems will require re-registration of transmitter
ID. <Ref. to TPM(diag)-10, REGISTER TRANS-
MITTER ID, OPERATION, Subaru Select Moni-
tor.>
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст