Subaru Legacy IV (2008 year). Service manual — part 259
ME(H4DOTC)-16
General Description
MECHANICAL
18251AA020
VALVE GUIDE
ADJUSTER
Used for installing intake and exhaust valve
guides.
499767200
VALVE GUIDE
REMOVER
Used for removing valve guides.
499767400
VALVE GUIDE
REAMER
Used for reaming valve guides.
499817100
ENGINE STAND
• Stand used for engine disassembly and
assembly.
• Used together with the ENGINE STAND
ADAPTER RH (498457000) & LH (498457100).
499977100
CRANK PULLEY
WRENCH
Used to stop rotation of the crank pulley when
loosening or tightening crank pulley bolts. (MT
model)
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST18251AA020
ST-499767200
ST-499767400
ST-499817100
ST-499977100
ME(H4DOTC)-17
General Description
MECHANICAL
499977400
CRANK PULLEY
WRENCH
Used to stop rotation of the crank pulley when
loosening or tightening crank pulley bolts. (AT
model)
499987500
CRANKSHAFT
SOCKET
Used for rotating crankshaft.
499587100
OIL SEAL
INSTALLER
Used for installing oil pump oil seal.
499587600
OIL SEAL
INSTALLER
Used for installing camshaft oil seal.
499597200
OIL SEAL GUIDE
• Used for installing camshaft oil seal.
• Used together with the OIL SEAL INSTALLER
(499587600).
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST-499977400
ST-499987500
ST-499587100
ST-499587600
ST-499597200
ME(H4DOTC)-18
General Description
MECHANICAL
498277200
STOPPER SET
Used for installing automatic transmission
assembly to engine.
42099AE000
QUICK
CONNECTOR
RELEASE
Used for disconnecting quick connector of the
engine compartment.
18371AA000
CONNECTOR
REMOVER
Used for disconnecting the quick connector on
the fuel return hose of the engine compartment.
18353AA000
CLAMP PLIERS
• Used for removing and installing the PCV
hose.
• This tool is made by the French company
CAILLAU. (code) 54.0.000.205
To make it easier to obtain, it has been provided
with a tool number.
1B022XU0
SUBARU SELECT
MONITOR III KIT
Used for troubleshooting the electrical system.
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST-498277200
ST42099AE000
ST18371AA000
ST18353AA000
ST1B022XU0
ME(H4DOTC)-19
General Description
MECHANICAL
2. GENERAL TOOL
E: PROCEDURE
It is possible to conduct the following service procedures with engine on vehicle, however, the procedures
described in this section are based on the condition that the engine is removed from vehicle.
• V-belt
• Timing belt
• Camshaft
• Cylinder head
TOOL NAME
REMARKS
Compression gauge
Used for measuring compression.
Timing light
Used for measuring ignition timing.
Vacuum gauge
Used for measuring intake manifold vacuum.
Oil pressure gauge
Used for measuring engine oil pressure.
Fuel pressure gauge
Used for measuring fuel pressure.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст