Subaru Legacy IV (2008 year). Service manual — part 50
IN(H4SO)-5
Air Cleaner Case
INTAKE (INDUCTION)
3. Air Cleaner Case
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the connector from mass air flow and
intake air temperature sensor.
3) Loosen the clamps (A) which connect the air
cleaner case and the intake boot.
4) Remove the clip (B) securing the upper side of
air cleaner case.
5) Remove the air cleaner case (rear) and air
cleaner element.
6) Remove the air intake duct. <Ref. to IN(H4SO)-
8, REMOVAL, Air Intake Duct.>
7) Remove the bolts (A) and nut (B) which secure
the air cleaner case to body.
8) Remove the air cleaner case (front).
IN-00203
IN-02264
IN-02266
(A)
(B)
IN-02192
IN-02216
(B)
(A)
IN(H4SO)-6
Air Cleaner Case
INTAKE (INDUCTION)
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
Bolt (A)
6 N·m (0.6 kgf-m, 4.4 ft-lb)
Nut (B)
7.5 N·m (0.8 kgf-m, 5.5 ft-lb)
NOTE:
When installing the air cleaner case (rear), align the
protrusion of the air cleaner case (rear) to the hole
on the air cleaner case (front) to install.
Tightening torque:
Clamp (A):
3 N·m (0.3 kgf-m, 2.2 ft-lb)
C: INSPECTION
Check for cracks or loose connections.
IN-02216
(B)
(A)
IN-02191
IN-02266
(A)
(B)
IN(H4SO)-7
Air Intake Chamber
INTAKE (INDUCTION)
4. Air Intake Chamber
A: REMOVAL
1) Loosen the clamp (A) which connects air intake
chamber to throttle body.
2) Loosen the clamp (B) which connects intake
boot to air intake chamber.
3) Remove the bolt (C) which secures air intake
chamber to the stay.
4) Disconnect the connector (D).
5) Disconnect the blow-by hoses, and then remove
air intake chamber.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
Clamp (A), (B)
3 N·m (0.3 kgf-m, 2.2 ft-lb)
Bolt (C)
6.5 N·m (0.7 kgf-m, 4.8 ft-lb)
C: INSPECTION
1) Check for cracks or loose connections.
2) Inspect that no foreign objects are mixed in the
air intake chamber.
(A)
(D)
(B)
(C)
(C)
IN-02141
(A)
(B)
(C)
(C)
IN-02142
IN(H4SO)-8
Air Intake Duct
INTAKE (INDUCTION)
5. Air Intake Duct
A: REMOVAL
1) Remove the clip which installs the air intake duct
on the front side of body.
2) Remove the air intake duct.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Check for cracks or loose connections.
2) Check that no foreign matter is mixed in air in-
take duct.
IN-02082
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст