Subaru Legacy IV (2008 year). Service manual — part 647
GD(H6DO)-208
Diagnostic Trouble Code (DTC) Detecting Criteria
GENERAL DESCRIPTION
5. DIAGNOSTIC METHOD
• Abnormality Judgement
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
Time Needed for Diagnosis: 212 ms
Malfunction Indicator Light Illumination: Illuminates as soon as a malfunction occurs.
• Normality Judgement
Judge as OK and clear the NG if the continuous time while the following conditions are established is more
than the predetermined time.
Time Needed for Diagnosis: 24 ms
Judgement Value
Malfunction Criteria
Threshold Value
Signal difference between two sensors
> Value from Map
Map
Throttle position sensor 1
opening angle (°) = d
0°
d d < 2.125 °
2.125 °
d d < 4.25 °
4.25 °
d d < 9 °
9 °
d d < 31.625 °
31.625 °
d d
Sensor output difference (°)
4.5 °
5.5 °
7.625 °
9.75 °
11.75 °
Judgement Value
Malfunction Criteria
Threshold Value
Signal difference between two sensors
d Value from Map
GD(H6DO)-209
Diagnostic Trouble Code (DTC) Detecting Criteria
GENERAL DESCRIPTION
ES:DTC P2138 THROTTLE/PEDAL POSITION SENSOR/SWITCH “D”/“E”
VOLTAGE CORRELATION
1. OUTLINE OF DIAGNOSIS
Judge as NG when the signal level of throttle position sensor 1 is different from the throttle position sensor 2.
2. COMPONENT DESCRIPTION
3. ENABLE CONDITION
4. GENERAL DRIVING CYCLE
Always perform the diagnosis continuously.
(1)
Engine control module (ECM)
(3)
Accelerator pedal position sensor
2 signal
(4)
Accelerator pedal position sensor
(2)
Accelerator pedal position sensor
1 signal
Secondary Parameters
Enable Conditions
Ignition switch
ON
Battery voltage
t 6 V
EN-01861
(2)
(3)
(4)
(1)
GD(H6DO)-210
Diagnostic Trouble Code (DTC) Detecting Criteria
GENERAL DESCRIPTION
5. DIAGNOSTIC METHOD
• Abnormality Judgement
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
Time Needed for Diagnosis: 116 ms
Malfunction Indicator Light Illumination: Illuminates as soon as a malfunction occurs.
• Normality Judgement
Judge as OK and clear the NG if the continuous time while the following conditions are established is more
than the predetermined time.
Time Needed for Diagnosis: 116 ms
Judgement Value
Malfunction Criteria
Threshold Value
Signal difference between two sensors
> Value from Map
Map
Throttle position sensor 1
opening angle (°) = d
0°
d d < 0.6 °
0.6 °
d d < 1.2 °
1.2 °
d d < 2 °
2 °
d d < 4 °
4 °
d d
Sensor output difference (°)
1.465 °
1.597 °
1.663 °
2.455 °
3.116 °
Judgement Value
Malfunction Criteria
Threshold Value
Signal difference between two sensors
d Value from Map
GD(H6DO)-211
Diagnostic Trouble Code (DTC) Detecting Criteria
GENERAL DESCRIPTION
ET:DTC P2227 BAROMETRIC PRESSURE CIRCUIT RANGE/PERFORMANCE
1. OUTLINE OF DIAGNOSIS
Detect the malfunction of barometric pressure sensor output property.
Judge as NG when the barometric pressure sensor output is largely different from the intake manifold pres-
sure at engine start.
2. COMPONENT DESCRIPTION
The barometric pressure sensor is built into the ECM.
3. ENABLE CONDITION
4. GENERAL DRIVING CYCLE
Perform the diagnosis once at ignition switch ON.
5. DIAGNOSTIC METHOD
• Abnormality Judgement
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
Time Needed for Diagnosis: 328 ms
Malfunction Indicator Light Illumination: Illuminates when malfunction occurs in 2 continuous driving cy-
cles.
• Normality Judgement
Judge as OK and clear the NG if the continuous time while the following conditions are established is more
than the predetermined time.
Time Needed for Diagnosis: 262 ms
Secondary Parameters
Enable Conditions
Engine speed
< 300 rpm
Vehicle speed
< 1 km/h (0.6 MPH)
Judgement Value
Malfunction criteria
Threshold value
|Barometric pressure – Intake manifold
pressure|
t 26.7 kPa (200 mmHg,
7.9 inHg)
|Intake manifold pressure at engine start
– Intake manifold pressure|
< 1.3 kPa (9.99 mmHg,
0.4 inHg)
Judgement Value
Malfunction criteria
Threshold value
|Barometric pressure – Intake manifold
pressure|
< 26.7 kPa (200 mmHg,
7.9 inHg)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст